topic Downgrade from DOT 8.0 to 7.3.4 in ONTAP Discussions https://community.netapp.com/t5/ONTAP-Discussions/Downgrade-from-DOT-8-0-to-7-3-4/m-p/69371#M16201 <HTML><HEAD></HEAD><BODY><P>Hi - When I buy a N3400 what DOT version will be installed? - If it has 8.0 can I downgrade it to 7.3.4? - The reason for this is to allow snapmirror volume replication from N3400 to N3300 ect.</P><P></P><P>If it can be downgraded what is the process pls? </P></BODY></HTML> Thu, 05 Jun 2025 07:02:27 GMT nsitps1976 2025-06-05T07:02:27Z Downgrade from DOT 8.0 to 7.3.4 https://community.netapp.com/t5/ONTAP-Discussions/Downgrade-from-DOT-8-0-to-7-3-4/m-p/69371#M16201 <HTML><HEAD></HEAD><BODY><P>Hi - When I buy a N3400 what DOT version will be installed? - If it has 8.0 can I downgrade it to 7.3.4? - The reason for this is to allow snapmirror volume replication from N3400 to N3300 ect.</P><P></P><P>If it can be downgraded what is the process pls? </P></BODY></HTML> Thu, 05 Jun 2025 07:02:27 GMT https://community.netapp.com/t5/ONTAP-Discussions/Downgrade-from-DOT-8-0-to-7-3-4/m-p/69371#M16201 nsitps1976 2025-06-05T07:02:27Z Re: Downgrade from DOT 8.0 to 7.3.4 https://community.netapp.com/t5/ONTAP-Discussions/Downgrade-from-DOT-8-0-to-7-3-4/m-p/69376#M16202 <HTML><HEAD></HEAD><BODY><P>See <A href="https://kb.netapp.com/support/index?page=content&amp;id=1012604" target="_blank">https://kb.netapp.com/support/index?page=content&amp;id=1012604</A> for disruptive revert procedure (it tells you about FAS3200 but procedure seems to be applicable to any system. Of course, you won’t need to change SP firmware etc. )</P></BODY></HTML> Tue, 11 Jan 2011 12:36:28 GMT https://community.netapp.com/t5/ONTAP-Discussions/Downgrade-from-DOT-8-0-to-7-3-4/m-p/69376#M16202 aborzenkov 2011-01-11T12:36:28Z Re: Downgrade from DOT 8.0 to 7.3.4 https://community.netapp.com/t5/ONTAP-Discussions/Downgrade-from-DOT-8-0-to-7-3-4/m-p/69381#M16203 <HTML><HEAD></HEAD><BODY><P>Will the N3400 come with DOT8.0.x?</P><P></P><P>Also, what is the latest 32bit DOT I should be I should be installing in this senario?</P><P></P><P>I am correct in thinking N3300 and N3600 are 32bit systems and the N3400 is x64??</P></BODY></HTML> Tue, 11 Jan 2011 20:07:20 GMT https://community.netapp.com/t5/ONTAP-Discussions/Downgrade-from-DOT-8-0-to-7-3-4/m-p/69381#M16203 nsitps1976 2011-01-11T20:07:20Z