Deduplication Status Via SNMP

ALEJANDROB — Thu, 05 Jun 2025 06:27:37 GMT

Hi all! It's posible to get deduplication status [ enable | disable ] via snmp? I want to add some Nagios Alert in case deduplication is not enable in each Volumen. Also it would be helpfull if i can get some stats about deduplication.

NetApp Release 8.0.2P6 7-Mode

Model Name: FAS3240

Thanks.

Re: Deduplication Status Via SNMP

ckyle — Fri, 11 May 2012 14:53:52 GMT

It certainly is. Here is the output from the MIB file on the Support site.

Sis snmp gets are prefaced by sis.<sisdescription>. So the call would be sis.sisstate (I think)

	sisState OBJECT-TYPE
	SYNTAX INTEGER {

disabled(1),

enabled(2)

}

MAX-ACCESS read-only

STATUS current

	DESCRIPTION
				"Indicates whether SIS is enabled on the
				volume or not."
	::= { sisEntry 3 }

Mapping that to an OID by using the traps.dat file you get .1.3.6.1.4.1.789.1.23.2.1.3.1 for the sis state.

I dont have any SNMP monitoring tools or even a linux box to test on so let me know how this works for you. I can provide more clarification if needed

All of the information above was located here:

https://kb.netapp.com/support/index?page=content&id=1011110

http://support.netapp.com/NOW/download/tools/mib/#filer - MIB file and Trap File (MIB file lists all SNMP Optios the filer has, trap file lists the OID number corresponding to the SNMP option in the MIB file. )

Re: Deduplication Status Via SNMP

ALEJANDROB — Fri, 11 May 2012 17:39:29 GMT

Thanks Kyle! Really usefull!

Cheers.

topic Re: Deduplication Status Via SNMP in ONTAP Discussions

Deduplication Status Via SNMP

Re: Deduplication Status Via SNMP

Re: Deduplication Status Via SNMP