topic Re: Load sharing volumes in Ontap Cluster mode in ONTAP Discussions

Load sharing volumes in Ontap Cluster mode

raj_shrivastava11 — Thu, 05 Jun 2025 05:41:35 GMT

In cluster mode Load sharing Volumes, when any Writes requests are coming, will they go to local LS volume or to Original Read-Write Volume which is in different node?

I understand that Read requests will go to local LS volume instead of Original Read-Write Volume to improve Read performance.

Re: Load sharing volumes in Ontap Cluster mode

SeanLuce — Wed, 05 Mar 2014 14:47:47 GMT

Load sharing mirrors are read only unless you are accessing it via the admin share.

Check out page 57 (7.2 Accessing Load-Sharing Mirror Volumes) of the following TR:

SnapMirror Configuration and Best Practices Guide for Clustered Data ONTAP - http://www.netapp.com/us/media/tr-4015.pdf

"By default, all client requests for access to a volume in an LS mirror set are granted read-only access. Read-write access is granted by accessing a special administrative mount point, which is the path that servers requiring read-write access into the LS mirror set must mount. All other clients will have read-only access."

When you are accessing the admin share for write access, you are accessing the source volume.

"After changes are made to the source volume, the changes must be replicated to the rest of the

volumes in the LS mirror set using the snapmirror update-ls-set command, or with a scheduled

update."

Re: Load sharing volumes in Ontap Cluster mode

raj_shrivastava11 — Wed, 05 Mar 2014 14:54:38 GMT

Thanks Sean for a clear explanation.

Re: Load sharing volumes in Ontap Cluster mode

SeanLuce — Wed, 05 Mar 2014 14:59:18 GMT

You are very welcome!

Re: Load sharing volumes in Ontap Cluster mode

ANISH5225 — Wed, 22 Oct 2014 08:58:32 GMT

Can we use load sharing volumes in file storage and block storage? I mean I have 2 flexvols one containing a lun and other CIFS shared. Can I create load sharing mirrors for both?

Re: Load sharing volumes in Ontap Cluster mode

ekashpureff — Wed, 22 Oct 2014 09:49:42 GMT

Anish -

LS mirrors are for file access (NAS), not for block (SAN).

I hope this response has been helpful to you.

At your service,

Eugene E. Kashpureff, Sr.
Independent NetApp Consultant http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, IT Learning Solutions http://sg.itls.asia/netapp
(P.S. I appreciate 'kudos' on any helpful posts.)