topic Re: Snapmirror Error, Transfer aborted: transfer aborted because of network error. in ONTAP Discussions

Snapmirror Error, Transfer aborted: transfer aborted because of network error.

pawansaathi — Wed, 08 Oct 2014 17:53:38 GMT

Hi Geeks,

Im getting, "Transfer aborted: transfer aborted because of network error." message whenever I run snapmirror update command. Please share you inputs on this.

Im running 8.1.4 7 mode by the way.

Thanks

Re: Snapmirror Error, Transfer aborted: transfer aborted because of network error.

JGPSHNTAP — Wed, 08 Oct 2014 18:06:46 GMT

What's in the snapmirror log in /etc/log.. You're not providing enough information

Re: Snapmirror Error, Transfer aborted: transfer aborted because of network error.

pawansaathi — Wed, 08 Oct 2014 18:17:13 GMT

I dont see any log related to this neither on the source side or in the destination filer.

The only thing i see is this in the messages file

"Wed Oct 8 13:09:29 EDT [filer:replication.src.err:error]: SnapMirror: source transfer from filer to IP address:15x.18x.xxx.xx : transfer aborted because of network error."

Re: Snapmirror Error, Transfer aborted: transfer aborted because of network error.

JGPSHNTAP — Wed, 08 Oct 2014 18:25:57 GMT

So there is no /etc/log/snapmirror

Re: Snapmirror Error, Transfer aborted: transfer aborted because of network error.

CASTROJSEC — Wed, 08 Oct 2014 18:33:34 GMT

Check your routing and interfaces. 9 times out of 10 its a routing issue unless there is some sort of firewall present as well. Were the mirrors working before?

run these commands and send us the output.

ifconfig -a

rdfile /etc/rc

rdfile /etc/snapmirror.conf

rdfile /etc/hosts

route -s

Re: Snapmirror Error, Transfer aborted: transfer aborted because of network error.

cgeck0000 — Wed, 08 Oct 2014 21:37:25 GMT

Pawansaathi,

Are you doing a SnapMirror update or trying to initialize? If you're updating then I'm guessing it was working?

If this is a new snapmirror relationship did you create it in System Manager or manually through the /etc/snapmirror.conf file?

If you can ping the resources from your destination to source and source to destination then make sure DNS is configured correctly if using storage controller names.

Make sure the correct names and IP's are in the /etc/hosts files at both locations.

Re: Snapmirror Error, Transfer aborted: transfer aborted because of network error.

pawansaathi — Thu, 09 Oct 2014 13:32:43 GMT

Im doing SnapMirror update and yes it was working perfectly fine before. I created the relationship manually through the snapmirror.conf file. I can ping from source to destination and vice versa. Hosts file looks okay and DNS also is configured properly.

The destination filer is located in India and the source filer is here in US, so im thinking it might be some kind of network limitations ???

Thanks,

Re: Snapmirror Error, Transfer aborted: transfer aborted because of network error.

pawansaathi — Thu, 09 Oct 2014 14:05:14 GMT

It started working now.

Thanks all of you.

Re: Snapmirror Error, Transfer aborted: transfer aborted because of network error.

cgeck0000 — Thu, 09 Oct 2014 14:27:03 GMT

Good deal.

What was the issue? And solutions?

These answers will help us all should we run into the same issue down the road. Thanks.

Re: Snapmirror Error, Transfer aborted: transfer aborted because of network error.

kiccha — Sat, 07 Feb 2015 04:57:55 GMT

Guys,

Since there is no reply on what was the cause im writng this as even i experienced the same situation.

The reason would be the source volume would be renamed or offline.

Re: Snapmirror Error, Transfer aborted: transfer aborted because of network error.

Afridi — Wed, 08 Jan 2020 09:06:18 GMT

i have the same issue still not resolved but i am getting a message that e3a link is down so i check the /etc/rc file and entry like following exists

vif create multi -b ip <name> e3a e3c

any help