https://community.netapp.com/t5/ONTAP-Discussions/SnapProtect-adding-a-new-tape-drive/m-p/94281#M19467 <P>Hi,</P><P>&nbsp;</P><P>Recently installed an extra 2 tape drives in&nbsp; Overland 4000 series via FC, I know zoning is fine as from the FAS controllers we can now see the extra 2 tape drives. Problem is SnapProtect is still only seeing the 2 original drives.</P><P>&nbsp;</P><P>Can any one advise which steps need to be followed to get Snap Protect to see the extra 2 drives inthe Overloand?</P><P>&nbsp;</P><P>Mike S</P> Thu, 05 Jun 2025 05:26:34 GMT M_Stubbs 2025-06-05T05:26:34Z https://community.netapp.com/t5/ONTAP-Discussions/SnapProtect-adding-a-new-tape-drive/m-p/94281#M19467 <P>Hi,</P><P>&nbsp;</P><P>Recently installed an extra 2 tape drives in&nbsp; Overland 4000 series via FC, I know zoning is fine as from the FAS controllers we can now see the extra 2 tape drives. Problem is SnapProtect is still only seeing the 2 original drives.</P><P>&nbsp;</P><P>Can any one advise which steps need to be followed to get Snap Protect to see the extra 2 drives inthe Overloand?</P><P>&nbsp;</P><P>Mike S</P> Thu, 05 Jun 2025 05:26:34 GMT https://community.netapp.com/t5/ONTAP-Discussions/SnapProtect-adding-a-new-tape-drive/m-p/94281#M19467 M_Stubbs 2025-06-05T05:26:34Z https://community.netapp.com/t5/ONTAP-Discussions/SnapProtect-adding-a-new-tape-drive/m-p/95931#M19605 <P>Hi Mike,</P><P>&nbsp;</P><P>Did you run the library &amp; drive configuration for NDMP devices after adding them to the controller?</P><P>&nbsp;</P><P>The steps are here:</P><P><A target="_self" title="SnapProtect BOL" href="http://docs.snapprotect.com/english_us/features/nas_lib/nas_library_drive_configuration.htm">http://docs.snapprotect.com/english_us/features/nas_lib/nas_library_drive_configuration.htm</A></P> Tue, 04 Nov 2014 18:58:05 GMT https://community.netapp.com/t5/ONTAP-Discussions/SnapProtect-adding-a-new-tape-drive/m-p/95931#M19605 jskinner 2014-11-04T18:58:05Z