Seeing if aggregate has 'hot disks' and needs reallocating

NICKDAVIES — Thu, 05 Jun 2025 05:24:35 GMT

HI All

Whats the best way to see if an aggregate has 'hot disks'. When an aggr has been grown but not reallocated, that sort of thing.

Whats the best way to see these on a per aggr level on 7 mode?

thanks

Re: Seeing if aggregate has 'hot disks' and needs reallocating

ekashpureff — Sat, 15 Nov 2014 04:25:53 GMT

Nick -

There's the advanced priv mode 'statit' command.

You won't find a man page for it on the support site.

'statit -b' to begin statistics collection.

Let it run for a few minutes.

'statit -e' to end and get the output.

There's a section of the output report on disk statistics.

Disks are listed by raid groups and aggrs.

Look at the ut% collumn to find hot spindles.

I hope this response has been helpful to you.

At your service,

Eugene E. Kashpureff, Sr.
Independent NetApp Consultant http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, IT Learning Solutions http://sg.itls.asia/netapp
(P.S. I appreciate 'kudos' on any helpful posts.)

topic Seeing if aggregate has 'hot disks' and needs reallocating in ONTAP Discussions

Seeing if aggregate has 'hot disks' and needs reallocating

Re: Seeing if aggregate has 'hot disks' and needs reallocating