system configuration shows different results.

SCOTT_V_RONTALE — Thu, 05 Jun 2025 05:23:37 GMT

Hi Everyone!

For clarification purposes , I want to know why commands sysconfig -a and sysconfig -d shows different result from sysconfig -r .

For -r it shows no failed disk but for -a and -d shows there is but upon checking the led there is no amber.

Im confused , where should I depend.

Thank you!

Cheers,
Scott

Re: system configuration shows different results.

hariprak — Wed, 03 Dec 2014 05:38:50 GMT

Hi,

sysconfig -a   Displays very detailed information about
                      each I/O device. This is more verbose than
                      the output produced by the -v option. Disk
                      sizes are scaled in GB. A GB is equal to
                      1000   MB   (1024   *   1024   * 1000) or
                      1,048,576,000 bytes.

sysconfig -r    Displays RAID configuration information.
                      The command output prints information about
                     all aggregates, volumes, file system disks,
                     spare disks, maintenance disks, and failed
                     disks. See the vol and aggr commands for
                     more information about RAID configuration.

sysconfig -d Displays vital product information for each
disk.

Thanks

topic system configuration shows different results. in ONTAP Discussions

system configuration shows different results.

Re: system configuration shows different results.