topic FAS2050 Configuration in ONTAP Discussions

FAS2050 Configuration

dan123 — Thu, 05 Jun 2025 05:22:32 GMT

Hi,

I'm trying to configure a FAS2050 via HTTP

I get on HTTP://"FAS2050 ip address"/na_admin/ -> insert username and password

After that i get

ERROR 500

Servlets not enabled

Can anybody help me with this issue?

That the httpd authorizations on console are

httpd.access	legacy
httpd.admin.access	legacy
httpd.admin.enable	on

httpd.admin.hostsequiv.enable off

httpd.admin.max_connections 512

httpd.admin.ssl.enable

httpd.admin.top-page.authentication on

httpd.autoindex.enable

off

httpd.bypass_traverse_checking off

httpd.enable	on
httpd.ipv6.enable	off
httpd.log.format	common	(value might be overwritten in takeover)
httpd.method.trace.enable	off
httpd.rootdir	XXX
httpd.timeout	300	(value might be overwritten in takeover)
httpd.timewait.enable	off	(value might be overwritten in takeover)

Thanks

Re: FAS2050 Configuration

ekashpureff — Tue, 16 Dec 2014 15:09:47 GMT

Dan -

The Filerview web GUI has been deprecated for Data ONTAP 8.

The http admin options are all for enabling API over http.

You can download and use the System Manager GUI from mysupport.netapp.com.

I hope this response has been helpful to you.

At your service,

Eugene E. Kashpureff, Sr.
Independent NetApp Consultant http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, IT Learning Solutions http://sg.itls.asia/netapp
(P.S. I appreciate 'kudos' on any helpful posts.)

Re: FAS2050 Configuration

dan123 — Tue, 16 Dec 2014 15:23:12 GMT

Hi,

Thanks so much for your answer.

The OnTap running on the FAS2050 is the 7.3.6, so i shouldn't have this problem.

Any other idea?

Thank you

Re: FAS2050 Configuration

hariprak — Wed, 17 Dec 2014 06:42:24 GMT

Hi,

Was it working earlier and this situation happened out of nowhere? Any details you can provide would be useful.

Thanks

Re: FAS2050 Configuration

dan123 — Wed, 17 Dec 2014 11:12:21 GMT

Hi,

No it wasn't. We are trying to do the first configuration.

It works via "console" through RS232, we have this problem when we try to connect via http.

Thanks

Re: FAS2050 Configuration

dan123 — Thu, 18 Dec 2014 11:04:06 GMT

Hi,

Any other idea about this topic?

Thanks