https://community.netapp.com/t5/ONTAP-Discussions/HA-failover-configuration/m-p/99825#M20290 <P>Hi</P><P>On a storage with 2 controller, Ontap 7.3.6, with "HA Pair" license active, using "OnCommand System Manager" if i configure the network interface i can choose the "HA failover mode" only on the network card e0b on both controller, why this option is not available on the e0a network card?</P> Thu, 05 Jun 2025 05:13:26 GMT dan123 2025-06-05T05:13:26Z https://community.netapp.com/t5/ONTAP-Discussions/HA-failover-configuration/m-p/99825#M20290 <P>Hi</P><P>On a storage with 2 controller, Ontap 7.3.6, with "HA Pair" license active, using "OnCommand System Manager" if i configure the network interface i can choose the "HA failover mode" only on the network card e0b on both controller, why this option is not available on the e0a network card?</P> Thu, 05 Jun 2025 05:13:26 GMT https://community.netapp.com/t5/ONTAP-Discussions/HA-failover-configuration/m-p/99825#M20290 dan123 2025-06-05T05:13:26Z https://community.netapp.com/t5/ONTAP-Discussions/HA-failover-configuration/m-p/99839#M20292 <P>You may need to do</P><P>ifconfig &lt;currentinterface&gt; -nfo</P><P>&nbsp;</P><P>and then</P><P>ifconfig &lt;newinterface&gt; nfo</P> Tue, 27 Jan 2015 19:18:28 GMT https://community.netapp.com/t5/ONTAP-Discussions/HA-failover-configuration/m-p/99839#M20292 Uddhav 2015-01-27T19:18:28Z