topic Re: Configuring Persistent static route - Interface option - 7-mode in ONTAP Discussions

Configuring Persistent static route - Interface option - 7-mode

s4rd1nh4 — Mon, 11 May 2015 15:22:17 GMT

Hello,

I need specify static route on pass by specific interface

In linux like as this command:

route add -net 192.168.100.0 netmask 255.255.255.0 gw 192.168.10.1 dev eth0

Re: Configuring Persistent static route - Interface option - 7-mode

rwelshman — Mon, 11 May 2015 20:53:38 GMT

You can use similar route commands on the filer. You have to add the command into the /etc/rc file as well so that it will be configured on a reboot.

Re: Configuring Persistent static route - Interface option - 7-mode

s4rd1nh4 — Mon, 11 May 2015 21:14:44 GMT

Hi rwelshman
I understand, however the network interface option no longer available, I would like to specify which network card se'ra used to route

Thank you for your help.

Re: Configuring Persistent static route - Interface option - 7-mode

rwelshman — Tue, 12 May 2015 17:55:50 GMT

do you have multiple interfaces on the same network?

Re: Configuring Persistent static route - Interface option - 7-mode

KennO — Fri, 20 Jul 2018 17:24:07 GMT

Yes, have 2 interfaces on same network, would like a host entry to specify that for connections to a specific host only use one specific port.