topic Re: Column width for cDOT statistics in ONTAP Discussions

Column width for cDOT statistics

NICKBARTON — Fri, 05 Dec 2014 16:39:12 GMT

Hello,

I have searched and searched and haven't found if there is a way to increase column width for cli statistics output in cMode. Running 8.2.1. Specifically qos statistics output but I'm assuming the formating command would be the same for either. I'm hoping there is a way to do this from the command line if not I guess I will pursue pulling it via powershell and formatting the results. My specific issue is around cutting off the name of qos policy groups. The naming format I am dealing with has the unique information as the last three characters of the volume/policy name.

Thanks,

Nick

Re: Column width for cDOT statistics

ekashpureff — Sun, 07 Dec 2014 07:00:05 GMT

Nick -

Have you tried 'set -showallfields true' ?

I hope this response has been helpful to you.

At your service,

Eugene E. Kashpureff, Sr.
Independent NetApp Consultant http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, IT Learning Solutions http://sg.itls.asia/netapp
(P.S. I appreciate 'kudos' on any helpful posts.)

Re: Column width for cDOT statistics

fschafhauser — Thu, 12 Feb 2015 16:00:13 GMT

Hi Nick, Hi Eugene,

thanks for your postings

I also searched to get rid of line feeds, too short columns at cDOT command line.

You can get csv like output after set this option:

set -showallfields true -showseparator ";"

Have fun!

Florian

Re: Column width for cDOT statistics

ANDREW_WERCHOWIECKI — Thu, 01 Oct 2015 07:12:07 GMT

This is bugging the hell out of me too. Really keen on getting a configurable column width because if your SVM name and volume name exceed the grand total of 5 characters a "vol show" command ends up using FOUR lines of text to show information for ONE volume. Imagine if you had 100 volumes! It's awful on the eyes, and it's 2015 - we've all got widescreen monitors, let us use them!

Re: Column width for cDOT statistics

marcusgross — Thu, 01 Oct 2015 10:28:23 GMT

Hi,

Netapp is in case of console resolution 30 years behind.

There is no way to change it.

Re: Column width for cDOT statistics

pavila — Mon, 05 Oct 2015 04:25:51 GMT

Have you tried using 'set -rows 0'

Re: Column width for cDOT statistics

ANDREW_WERCHOWIECKI — Mon, 05 Oct 2015 05:35:38 GMT

That only removes the "Press <space> to page down, <return> for next line, or 'q' to quit..." and mashes all the columns together.

Why not simply make the columns variable width, perhaps with an upper limit?

I mean look at this:

cluster::> disk show
Usable Disk Container Container
Disk Size Shelf Bay Type Type Name Owner
---------------- ---------- ----- --- ------- ----------- --------- --------

The disk column is 16 characters long, yet the Owner column is only 8 characters long. So NetApp decided to make sure their edge case of disk naming is covered (MCC disk names are much long than the typical 6 characters of "stack.shelf.bay") but decided that nobody would ever use a node hostname would never exceed 8 characters? Really? Really? Even NetBIOS allows up to 15 character hostnames in Windows environments.

Re: Column width for cDOT statistics

rustyb — Wed, 06 Dec 2017 19:25:29 GMT

This did the trick for me!!

Not sure why setting 'rows 0' removed the column width restriction, but it did the trick.

Thank you!