topic how to check which disk is replaced for the failed drive and the rebuild status of the disk in ONTAP Discussions

how to check which disk is replaced for the failed drive and the rebuild status of the disk

SameerKulkarni — Wed, 04 Jun 2025 23:05:30 GMT

Hello all,

This is my first post on NetApp communicty,

i would like to know the command to check when a disks fails, which disk has replaced the failed one and also the rebuild status of that disk.

Thanks in Advanced.

Cheers,

Sameer

aborzenkov — Fri, 09 Oct 2015 10:57:41 GMT

I do not think there is command to see it. You can check logs or previous ASUP.

SameerKulkarni — Fri, 09 Oct 2015 12:06:24 GMT

so the only way is to compare old ASUP logs with new one to see which spare has replaced the failed disk ?

YIshikawa — Sat, 10 Oct 2015 04:44:06 GMT

If reconstruction is in progress, you can check by 'sysconfig -r'.

if you know when the disk failed, check messages or ems log. It clearly indicate which disk is used for reconstruction.

if you don't you exact date of disk failure, compare ASUP.