topic Can you run an Upgrade Advisor again after the upgrade has already occured in ONTAP Discussions https://community.netapp.com/t5/ONTAP-Discussions/Can-you-run-an-Upgrade-Advisor-again-after-the-upgrade-has-already-occured/m-p/112598#M23871 <P>I wanted to see if I could run UA against a system that has already been upgraded to review the procedure the customer took.</P> <P>&nbsp;</P> <P>For example, FilerA was upgraded from 8.2 -&gt; 8.2.1</P> <P>- UA now shows 8.2.1 as the "Current OS" and it cannot be modified. I would like to see the UA for this system when the "Current OS" was 8.2.</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>Can you specify using an older ASUP (pre-upgrade) to see the UA that would of been generated?</P> Wed, 04 Jun 2025 22:45:31 GMT aholt 2025-06-04T22:45:31Z Can you run an Upgrade Advisor again after the upgrade has already occured https://community.netapp.com/t5/ONTAP-Discussions/Can-you-run-an-Upgrade-Advisor-again-after-the-upgrade-has-already-occured/m-p/112598#M23871 <P>I wanted to see if I could run UA against a system that has already been upgraded to review the procedure the customer took.</P> <P>&nbsp;</P> <P>For example, FilerA was upgraded from 8.2 -&gt; 8.2.1</P> <P>- UA now shows 8.2.1 as the "Current OS" and it cannot be modified. I would like to see the UA for this system when the "Current OS" was 8.2.</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>Can you specify using an older ASUP (pre-upgrade) to see the UA that would of been generated?</P> Wed, 04 Jun 2025 22:45:31 GMT https://community.netapp.com/t5/ONTAP-Discussions/Can-you-run-an-Upgrade-Advisor-again-after-the-upgrade-has-already-occured/m-p/112598#M23871 aholt 2025-06-04T22:45:31Z