FTP port settings changing

sanadmin_do — Wed, 04 Jun 2025 22:30:03 GMT

I want to update the 'Disk Qualification Package' on a FAS8040 with cDOT 8.3P2. When I try to update the package with the command 'storage firmware download node * -package-url http://ftpserv1/ftptrans/..../qual_devices.zip' I get the error message: 'Download failed. Reason: Failed to download package from /ftptrans/.../qual_devices.zip. Reason: Couldn't connect to server : couldn't connect to host at ftpserv1:80.'

Is it correct that the command wants to connect the ftpserv1 by port number 80 ? Our ftpserv1 is accessible at port 21. Where can I change the FTP port on the NetApp-System from port 80 to port 21 ?

It don't find any information to the error message.

Re: FTP port settings changing

aborzenkov — Thu, 17 Dec 2015 09:46:01 GMT

You told it to use HTTP, not FTP. If you want to use ftp, use ftp://... URL.

Re: FTP port settings changing

sanadmin_do — Thu, 17 Dec 2015 10:50:04 GMT

I saw my mistake only after creating this entry. Entry has been done.

topic Re: FTP port settings changing in ONTAP Discussions

FTP port settings changing

Re: FTP port settings changing

Re: FTP port settings changing