topic Re: CDP support in presence of 10G interfaces? in ONTAP Discussions https://community.netapp.com/t5/ONTAP-Discussions/CDP-support-in-presence-of-10G-interfaces/m-p/10509#M2422 <HTML><HEAD></HEAD><BODY><P>Never mind, found out at the support site, it will not work with tagged vlans <SPAN __jive_emoticon_name="plain" __jive_macro_name="emoticon" class="jive_macro jive_macro_emoticon jive_emote" src="https://community.netapp.com/5.0.1/images/emoticons/plain.gif"></SPAN></P></BODY></HTML> Fri, 13 Dec 2013 07:02:01 GMT TOMASYAWORKS 2013-12-13T07:02:01Z CDP support in presence of 10G interfaces? https://community.netapp.com/t5/ONTAP-Discussions/CDP-support-in-presence-of-10G-interfaces/m-p/10499#M2418 <HTML><HEAD></HEAD><BODY><P>I have 4 filers connected to two groups of switches (Cisco 3750E and Nexus 5010) with 1G and 10G ports. Filers are FAS3170 and FAS6240 with 8.0.2P6. I enabled cdpd on filers but got extremely weird results</P><P></P><P>a) switches do not show 10G filer ports at all</P><P>b) switches correctly show 1G filer ports connected to 3750 (there is no 1G ports on Nexus)</P><P>c) filers do not actually show <STRONG>any </STRONG>port on connected Cisco, neither 1G nor 10G</P><P>d) filers do show directly connected ports of each other (like ACP or one ports that were used for snapmirror seeding)</P><P></P><P>I have another HA pair connected to Cisco 3750G with 1G interfaces only and exactly the same Data ONTAP and there it is mostly OK; at least filers do show connected switch ports.</P><P></P><P>Both 3750 and Nexus correctly display connected ports of each other (with exception of Nexus management port, but I do not know if CDP is active there at all).</P><P></P><P>Anyone has seen this before? May be there is open BURT already, in which case I will try to open case.</P></BODY></HTML> Thu, 05 Jun 2025 06:24:25 GMT https://community.netapp.com/t5/ONTAP-Discussions/CDP-support-in-presence-of-10G-interfaces/m-p/10499#M2418 aborzenkov 2025-06-05T06:24:25Z Re: CDP support in presence of 10G interfaces? https://community.netapp.com/t5/ONTAP-Discussions/CDP-support-in-presence-of-10G-interfaces/m-p/10504#M2420 <HTML><HEAD></HEAD><BODY><P>Same here, within a HA PAIR, 1 node shows all interface (4 10GB and 1 e0m) but the other node does show only the e0m, not the 10GB interfaces.</P><P>Both nodes are identical (i think ;-))</P><P></P><P>Anyone?</P></BODY></HTML> Tue, 10 Dec 2013 10:50:32 GMT https://community.netapp.com/t5/ONTAP-Discussions/CDP-support-in-presence-of-10G-interfaces/m-p/10504#M2420 TOMASYAWORKS 2013-12-10T10:50:32Z Re: CDP support in presence of 10G interfaces? https://community.netapp.com/t5/ONTAP-Discussions/CDP-support-in-presence-of-10G-interfaces/m-p/10509#M2422 <HTML><HEAD></HEAD><BODY><P>Never mind, found out at the support site, it will not work with tagged vlans <SPAN __jive_emoticon_name="plain" __jive_macro_name="emoticon" class="jive_macro jive_macro_emoticon jive_emote" src="https://community.netapp.com/5.0.1/images/emoticons/plain.gif"></SPAN></P></BODY></HTML> Fri, 13 Dec 2013 07:02:01 GMT https://community.netapp.com/t5/ONTAP-Discussions/CDP-support-in-presence-of-10G-interfaces/m-p/10509#M2422 TOMASYAWORKS 2013-12-13T07:02:01Z