topic Re: non zero used-column for partner-disks in sysconfig -r in ONTAP Discussions

non zero used-column for partner-disks in sysconfig -r

cheese123 — Wed, 04 Jun 2025 22:24:16 GMT

i have several nodes with the following output in sysconfig -r:

...

RAID Disk       Device          HA SHELF BAY CHAN Pool Type RPM Used (MB/blks)    Phys (MB/blks)
---------       ------          ------------- ---- ---- ---- ----- --------------    --------------
partner         sw2_rz2:6.102   4c    6   6   FC:B   0 FCAL 15000 0/0               420156/860480768
partner         sw1_rz2:7.21    4a    1   5   FC:A   0 FCAL 15000 0/0               420156/860480768
partner         sw1_rz1:7.19    4b    1   3   FC:A   1 FCAL 15000 0/0               420156/860480768
partner         sw1_rz1:6.82    4a    5   2   FC:A   1 FCAL 15000 0/0               420156/860480768
partner         sw1_rz1:7.28    4a    1   12 FC:A   1 FCAL 15000 0/0               420156/860480768
partner         sw1_rz1:6.101   4b    6   5   FC:A   1 FCAL 15000 0/0               420156/860480768
partner         sw2_rz2:6.97    4d    6   1   FC:B   0 FCAL 15000 0/0               420156/860480768
partner         sw1_rz2:6.103   4a    6   7   FC:A   0 FCAL 15000 0/0               420156/860480768
partner         sw1_rz1:6.102   4a    6   6   FC:A   1 FCAL 15000 0/0               420156/860480768
partner         sw1_rz1:8.20    4a    1   4   FC:A   1 FCAL 15000 418000/856064000 420156/860480768
partner         sw2_rz2:6.107   4d    6   11 FC:B   0 FCAL 15000 0/0               420156/860480768
partner         sw1_rz1:6.87    4b    5   7   FC:A   1 FCAL 15000 0/0               420156/860480768

i would expect only zeros in the used-column of partner disks

this is a metro-cluster ontap 8.1.4P8 7-Mode

Is there something i should be worried about?

yours

josef

Re: non zero used-column for partner-disks in sysconfig -r

Renifa — Mon, 11 Jan 2016 08:26:57 GMT

Hi,

There is nothing to worry about this output. That is because filer does not access data on partner disks unless it does the takeover. In order to know the used size of the disk, RAID must read table of contents from that disk. Therefore, RAID usually reports only raw size of partner disks that results in showing used size for some, but not all partner disks.

Refer KB 3012254 "https://kb.netapp.com/support/index?page=content&id=3012254&actp=search&viewlocale=en_US&searchid=1452500241097" for more information and the Bug details.

Hope this helps.

Re: non zero used-column for partner-disks in sysconfig -r

georgevj — Wed, 27 Jan 2016 10:36:09 GMT

Seems like the link is broken. use the following link or search for KB id 3012254

https://kb.netapp.com/support/index?page=content&id=3012254

Re: non zero used-column for partner-disks in sysconfig -r

nicholsongc — Tue, 27 Dec 2016 15:00:01 GMT

Not to belabor the point but WHY some and not others?

The partner clearly was able to determine the USED info for one disk (sw1_rz1:8.20). What is the reasoning behind "some but not others"?