topic Re: Change Flow control in C-DOT in ONTAP Discussions

Change Flow control in C-DOT

RAMACHANDRA_CL — Wed, 04 Jun 2025 21:28:25 GMT

I have ifgrp "a10a" with two ports e0a and e0b. active aggr is e0b which flow flontrol is set to Full and other port e0b flow control is set to none. In switch both ports are set to flow control as none.

This ifgrp a10a has VLANn tag and created two lifs on top with role as intercluster. I cannot move intercluster lif to anyother port. (I dont have additional port in same storage).

How can I modify flow control of port e0b from full to none?

Need advise from experts..

Re: Change Flow control in C-DOT

JGPSHNTAP — Mon, 11 Apr 2016 15:04:45 GMT

net port modify

Re: Change Flow control in C-DOT

SeanHatfield — Tue, 12 Apr 2016 02:16:34 GMT

Remove it from the ifgrp, change the port's flow control to none, then add it back into the ifgrp.

Re: Change Flow control in C-DOT

Sahana — Tue, 12 Apr 2016 02:51:08 GMT

Use net port modify -node node01 -port e0b -flowcontrol-admin none

Refer https://library.netapp.com/ecmdocs/ECMP1366832/html/network/port/modify.html