Management IP

Eric_Myself — Wed, 04 Jun 2025 20:22:33 GMT

Hi,

On Cdot 8.2.2P2 with a 4 nodes cluster I have the following configuration:

Node 1 e0m/SP are on 10.x.x.12 and 13 for node management en Service Processor

Node 2 e0m/SP are on 10.x.x.14 and 15

Node 3 e0m/SP are on 10.x.x.16 and 17

Node 4 e0m/SP are on 10.x.x.18 and 19

SVM for cluster admin 10.x.x.20 for remote administration (ssh/On Comand)

Node 1 e0a

Node 2 e0a

Node 3 e0a

Node 4 e0a

Actually, they are on same switch/Network but customer would like to spread Cluster Management and Admin to different Network/Switch like below:

Node 1 e0m/SP are on 11.x.x.12 and 13 for node management en Service Processor

Node 2 e0m/SP are on 11.x.x.14 and 15

Node 3 e0m/SP are on 11.x.x.16 and 17

Node 4 e0m/SP are on 11.x.x.18 and 19

SVM for cluster management 192.x.x.20 for remote administration (ssh/On Comand)

Node 1 e0a

Node 2 e0a

Node 3 e0a

Node 4 e0a

I assume it should work but would like to double check so do you have already seen this kind of configuration? any issue with remote management ?

Any document related to this kind of configuration ?

Best Regards

Eric

topic Management IP in ONTAP Discussions