topic Re: FAS3220 Dual Chassis HA interconnect error in ONTAP Discussions

FAS3220 Dual Chassis HA interconnect error

uwf_chowell — Wed, 05 Oct 2016 15:53:23 GMT

Have a 2-node FAS2554 running ONTAP 9. I see this error message in the event log a couple of times an hour from both nodes:

csm.sessionFailed: Cluster interconnect session (req=uwfclu1c-01:dblade, rsp=uwfclu1c-02:dblade, uniquifier=08053e1f8099756e) failed with record state ACTIVE and error CSM_CONNABORTED

The error message appears to be benign so I'm just wondering where this is coming from.

Thanks,

--Carl

Re: FAS3220 Dual Chassis HA interconnect error

aborzenkov — Thu, 06 Oct 2016 04:15:44 GMT

I do not know exact reason for this message, but it is not HA, it is cluster interconnect.

Re: FAS3220 Dual Chassis HA interconnect error

sam_wozniak — Thu, 05 Jan 2017 20:06:42 GMT

I'm seeing this too on a FAS3220 recently upgraded to 8.3.2P5 and separately on a FAS2650 running 9.1RC1.

Re: FAS3220 Dual Chassis HA interconnect error

Emile-Bodin — Thu, 12 Jan 2017 08:31:33 GMT

Hello,

The CSM (cluster session manager) is responsible for the connections between de dblades on the local or remote node/cluster.

The error "failed with record state ACTIVE and error CSM_CONNABORTED" is a message that is logged whenever a active snapmirror session has been completed and the connection is closed. In most cases this message is informational.

If you are experiencing snapmirror or cluster peering issues I would recommend opening a support case for further investigations.

Regards