ONTAP SELECT PREREQUISITES FOR A DEMO

gmilazzoitag — Wed, 04 Jun 2025 15:30:14 GMT

Hi all,

we're planning to setup a limited version of Ontap Select single node for demo and study purpose.

I've read that minimum disk to have in the ESXi host is 8 and that there are 2 TB plus 266 GB needed.
I don't have free servers with all that resources.

Is that a must have or can I setup Select also on a 4-5 disks ESXi host with less space on the Raid5 volume prepared?

Regards,

Re: ONTAP SELECT PREREQUISITES FOR A DEMO

JohnChampion — Wed, 01 Feb 2017 22:35:48 GMT

You can install a single node Select cluster on less than 8 disks as long as the minimum datastore size is met. The 8-24 disk requirement is for production systems and is generally intended for I/O performance (on spinning disks) and disk/data protection (RAID5). If you're just setting up an eval/research system to check things out it'll work just fine.

Suggest you download the latest version (9.1GA) - the minimum datastore size for a single node evaluation install has been reduced (Single node > 1.3TB) and the webGUI is much better.

http://mysupport.netapp.com/NOW/download/software/ontap_select/9.1/

A final option is to download the single node export under Downloads->Product Evaluation. It ia an export of a prebuilt single node instance. This will allow you to avoid using the DeployVM entirely if you want.

http://mysupport.netapp.com/NOW/download/software/eval_ontapselect/9.1RC1D1/

From the opening screen of the latest Deploy VM (2.2.1):

Vmware vSphere Enterprise or Enterprise+ license
ESXi versions: 5.5 Update 3a or 6.0 GA
Datastore

Type: VMFS5, internal DAS
Size
- Single node > 1.3TB
- Multi node > 2.3TB

Good Luck!

Re: ONTAP SELECT PREREQUISITES FOR A DEMO

gmilazzoitag — Sun, 05 Feb 2017 13:28:17 GMT

Very good advices.
Thank you very much

topic ONTAP SELECT PREREQUISITES FOR A DEMO in ONTAP Discussions

ONTAP SELECT PREREQUISITES FOR A DEMO

Re: ONTAP SELECT PREREQUISITES FOR A DEMO

Re: ONTAP SELECT PREREQUISITES FOR A DEMO