topic Re: interconnect error in ONTAP Discussions

interconnect error

tuncay — Wed, 04 Jun 2025 15:27:33 GMT

Hi,

We have metrocluster system and getting interconnect error messages.

[Node02:monitor.globalStatus.critical:CRITICAL]: Controller failover of Node01 is not possible: unsynchronized log.
[Node02:scsitarget.vtic.down:notice]: The VTIC is down.
[Node02:cf.fsm.takeoverOfPartnerDisabled:error]: Failover monitor: takeover of Node01disabled (interconnect error).
[Node02:scsitarget.vtic.up:notice]: The VTIC is up.

Ontap keep going giving that message.

We checked switch config both fcvi port showing healty than checked cables , SFP but none of them has problem.

We also opened a case but still could not find out why we are getting this messages.

Any ideas ?

Thanks,

Tuncay

Re: interconnect error

akiendl — Tue, 14 Feb 2017 06:52:37 GMT

can you please send me the case# in a private message? would take a look at the case and come back to you.

Thx,

ak.

Re: interconnect error

akiendl — Tue, 14 Feb 2017 06:55:58 GMT

if that is not working you can also send to <forumusername>@netapp.com

Re: interconnect error

Murat — Thu, 16 Feb 2017 08:07:23 GMT

Selam Tuncay,

There is bug looks like causes same errors that you've provided. Here it recommends to upgrade FOS.

http://mysupport.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=488377

Regards,

Murat.

Re: interconnect error

akiendl — Thu, 16 Feb 2017 08:49:07 GMT

these bugs are pretty old and should be fixed in all current releases.

ak.

Re: interconnect error

tuncay — Thu, 16 Feb 2017 17:19:20 GMT

Selam Murat,

The switch OS is up to date . The fcvi ping is not wotking on one port . When we disable that port from switch, error messages stoping.

We replaced sfp, cables but it did not work.

Thanks,

Tuncay

Re: interconnect error

AlexDawson — Thu, 16 Feb 2017 23:16:45 GMT

Which hardware platform and which version of ONTAP are you running?

Re: interconnect error

tuncay — Fri, 17 Feb 2017 19:33:53 GMT

Version : 8.2.3 7-Mode

Hardware : FAS6280