topic Re: Upgrade NetApp 8.1.1 7-Mode (FAS3070) to NetApp 9.0 (7-Mode) in ONTAP Discussions

Upgrade NetApp 8.1.1 7-Mode (FAS3070) to NetApp 9.0 (7-Mode)

Tirthaghy — Wed, 04 Jun 2025 15:22:31 GMT

Host*> vol status -f

Broken disks

RAID Disk       Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks)    Phys (MB/blks)
---------       ------ ------------- ---- ---- ---- ----- --------------    --------------
predict failure 0c.74   0c    4   10 FC:B   - FCAL 15000 560000/1146880000 560208/1147307688

So, to replace this disk, is there a need to fail it? What is the difference between predictive failure, and failed disk?

Thanks

Re: Upgrade NetApp 8.1.1 7-Mode (FAS3070) to NetApp 9.0 (7-Mode)

miguelvalls — Mon, 06 Mar 2017 19:26:10 GMT

Hey

In my understanding Data ONTAP every weekend by default run some analisys (disk scrubbing) on the disks and if it detects something wrong it will mark the disk as prefailed, at the end if you have an active maintenace support contract NetApp will replace the disk without any problem with an output of a "sysconfig -a" command. If you have not an active support contract try to "unfail" (this is an advanced command) the disk first, sometimes that can help and then zero the disk.

Predic failure or failed disk it is basically the same.

hope that helps.

regards,

Miguel Valls

Re: Upgrade NetApp 8.1.1 7-Mode (FAS3070) to NetApp 9.0 (7-Mode)

ShivaR — Tue, 07 Mar 2017 04:49:21 GMT

It is sometimes possible to predict a disk failure based on a pattern of recovered errors that have occurred. In such cases, the disk reports a predictive failure.

the system initiates Rapid RAID Recovery to copy data from the failing disk to an available spare disk. When data is copied, the disk is marked as failed and placed in the pool of broken disks

So Predict failure is nothing but the disk has been failed. You can directly go and replace that disk with new one 🙂

Re: Upgrade NetApp 8.1.1 7-Mode (FAS3070) to NetApp 9.0 (7-Mode)

rorzmcgauze — Tue, 07 Mar 2017 10:34:53 GMT

you could use the following cmd to help

storage disk fail