topic Cluster peering and Snapmirror question in ONTAP Discussions

Cluster peering and Snapmirror question

paulchan — Wed, 04 Jun 2025 14:47:50 GMT

Hi,

Below diagram is intercluster LIF setup, IC1 & IC2 LIFs created in node A, IC3 & IC4 LIFs created in node B, IC5 & IC6 LIFs create in other cluster (node C & D).

Network address IC1 & IC3 is 10.0.20.98,99

Network address IC2 & IC4 is 10.0.30.98,99

Network address IC5 & IC6 is 10.0.50.98,99

We will setup cluster peering between 2 sites.

1. Does anyone know the configuration is correct?

2. How the replication traffice route?

Thanks

Paul

Re: Cluster peering and Snapmirror question

Sahana — Thu, 27 Jul 2017 08:34:44 GMT

Supported peering topology: http://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-dpg%2FGUID-AA5A0AF3-6AA8-4518-9A71-C037F56A28F4.html&resultof=%22%73%75%70%70%6f%72%74%65%64%22%20%22%73%75%70%70%6f%72%74%22%20%22%63%6c%75%73%74%65%72%22%20%22%70%65%65%72%69%6e%67%22%20%22%70%65%65%72%22%20

Refer http://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.exp-clus-peer%2Fhome.html

Re: Cluster peering and Snapmirror question

paulchan — Thu, 27 Jul 2017 09:37:48 GMT

Hi Sahana,

Thanks for your reply, so my configuration is supported topology?

Regards,

Paul

Re: Cluster peering and Snapmirror question

Sahana — Thu, 27 Jul 2017 09:44:32 GMT

No, need a full mesh topology. Destination cluster also needs 2 connections from each node.