topic newly added shelf is missing in "storage shelf show" output in ONTAP Discussions

newly added shelf is missing in "storage shelf show" output

dinneshraj5 — Thu, 08 Feb 2018 21:17:59 GMT

Hi All,

We have added a new shelf today, I can see it in sasadmin expander_map and storage show disk -p and node-connectivity outputs but not in "storage shelf show" output.

any idea ?

Re: newly added shelf is missing in "storage shelf show" output

carlv — Fri, 22 Nov 2019 18:57:43 GMT

hi, were you able to resolve this issue ? It would appear I may have the same issue. tks Carl

Re: newly added shelf is missing in "storage shelf show" output

mjdalton1 — Fri, 22 Nov 2019 20:28:48 GMT

Carl,

What is the output of the following commands?

node run -node <node_name> sasadmin expander_map
node run -node <node_name> sasadmin shelf 'adapter_name' #adapter_name=sas_port loop is plugged into.
node run -node <node_name> sasadmin expander_map 'adapter_name'

node run -node <node_name> disk show -n

Re: newly added shelf is missing in "storage shelf show" output

carlv — Mon, 25 Nov 2019 13:03:14 GMT

thanks for your response . I have a case open for this issue and I am working with TS to reslove it.

I can see both shelves, sas_port loops and all the disks using these commands.

tks for you help.

Carl

Re: newly added shelf is missing in "storage shelf show" output

liuh — Mon, 18 Nov 2024 07:53:04 GMT

The following link has the command for storage shelf show, you can see if there is one you need：storage shelf show