topic Re: What is the recommended way to set up nodes mgmt LIF's? in ONTAP Discussions

What is the recommended way to set up nodes mgmt LIF's?

netappmagic — Fri, 14 Sep 2018 01:31:10 GMT

We have used a dedicated physical port for cluster and nodes management, separated from data LACP ports group on each node in the cluster. LACP group (4x10GbE) has been used for all DATA LIF's

My question is:

Is this still a recommended setup? Can node mgmt LIF be created on Data LACP group which should be used for Data Lif? and Why?

Re: What is the recommended way to set up nodes mgmt LIF's?

GrumpyOldMen — Thu, 22 Nov 2018 17:18:27 GMT

According to me this should be possible. But not really best practise. For management I use the interface e0M. It's a 1Gb interface and barely usable for production. It also makes sense to seperate the management from the production in repsect to interfaces. What is bandwith is fully used and you want to check why??? If your managment is then on the same interfaces you even cannot access.....

Re: What is the recommended way to set up nodes mgmt LIF's?

mrahul — Fri, 23 Nov 2018 06:08:50 GMT

This completely depends on the Datacenter topology and its need to what kind of data and workload which is to be supported. Please refer to "Best Practices for Network Configuration with NetApp Storage Systems" as per the KB article https://kb.netapp.com/app/answers/answer_view/a_id/1000997/~/best-practices-for-network-configuration-with-netapp-storage-systems-

If this post was satisfactory to your queries or resolved your issue, help others by selecting ACCEPT AS SOLUTION or clicking on LIKE.

Re: What is the recommended way to set up nodes mgmt LIF's?

liuh — Wed, 20 Nov 2024 07:51:33 GMT

hi,

This link has documentation about lif that I hope will help you：：

Create a LIF (network interface)