Hybrid Aggregate recommendation - for DS460C with 960GB SSD and 4TB SATA

Bhanoji7 — Wed, 04 Jun 2025 12:53:32 GMT

Could the experts on this forum advise me the best practice for the Hybrid aggregate with 4TB sata and 960GB SAS on DS460C shelf. how many SSDs are recommended for 50x4TB SATA disks. Best Regards, Bhanoji

Re: Hybrid Aggregate recommendation - for DS460C with 960GB SSD and 4TB SATA

GidonMarcus — Mon, 04 Feb 2019 09:50:58 GMT

You can check here how much of your workload is cacheable and what's the optimal cache size for your existing workload

https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-psmg%2FGUID-2C3EC0DF-FEFE-4871-A161-4A3BAC87DB69.html&cp=2_7_4_1

And you can run it again after adding the SSD's to see if you should add more.

https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-psmg%2FGUID-2A40109E-EE1A-43CB-B392-D7E4B2FF10EC.html&cp=2_7_4_4

is not a big fan of hybrid systems (didn't tested NetApp one) i think you better start without. see if there any problems, what the out put of the above command (perhaps you don't need it and flashcache doing it's job) and of course see if the clients are happy and if you see latency anywhere , if there's no issues i would use the SSD not as a tier - but as a separate aggregate to accommodate workloads that really benefit from SSD (for example SQL tempDB). but that just an opinion - without knowing your workloads......

Gidi

Re: Hybrid Aggregate recommendation - for DS460C with 960GB SSD and 4TB SATA

Bhanoji7 — Mon, 04 Feb 2019 10:15:14 GMT

Thanks Gid. that was helpful.

topic Re: Hybrid Aggregate recommendation - for DS460C with 960GB SSD and 4TB SATA in ONTAP Discussions

Hybrid Aggregate recommendation - for DS460C with 960GB SSD and 4TB SATA

Re: Hybrid Aggregate recommendation - for DS460C with 960GB SSD and 4TB SATA

Re: Hybrid Aggregate recommendation - for DS460C with 960GB SSD and 4TB SATA