topic Re: Get-NcVolSize command not reporting volsize correctly when > 1024GB using Ontap Powershell T in ONTAP Discussions

Get-NcVolSize command not reporting volsize correctly when > 1024GB using Ontap Powershell Toolkit

lafoucrier — Wed, 31 Jul 2019 16:07:33 GMT

Hello Powershell Coders,

My config :

Powershelltoolkit : 9.6.0 ou 4.5.0

Dataontap : 9.4P2

I'm facing a strange problem with command Get-NcVolSize :

- volsize < to 1024 GB or a strict multiple of 1024GB (ex : 2048GB) is reported correctly,

- volsize > to 1024 GB or not strict multiple of 1024GB (ex : 1025GB) is reported incorrectly (equal to 0 systematically).

This behaviour have a side effect on "Set-NcVolSize" command, for volume > to 1024GB or not strict multiple of 1024, and make the resize command fail!

Someone experiencing the same issue/ has a workaround for this?

Many thanks in advance.

Best regards,

Yannick

Re: Get-NcVolSize command not reporting volsize correctly when > 1024GB using Ontap Powershell T

donny_lang — Wed, 31 Jul 2019 18:19:08 GMT

Can you show us the command you're running and the output where the volume size is reported incorrectly (sanitizing volume/vserver names as necessary)?

Thanks!

Donny

Re: Get-NcVolSize command not reporting volsize correctly when > 1024GB using Ontap Powershell T

lafoucrier — Thu, 01 Aug 2019 09:10:42 GMT

here is the command i use (very simple) :

Get-NcVolSize <volume name> -VserverContext <vservername>

when the volume is under or equal to 1024 (return in json format) :

"VolumeSize": 548682072064,
"IsReadOnlyFlexVol": false,
"IsReplicaFlexVol": false,
"IsFixedSizeFlexVol": false

when the volume is above 1024 (here set to 1025) (return in json format) :

"VolumeSize": 0,
"IsReadOnlyFlexVol": false,
"IsReplicaFlexVol": false,
"IsFixedSizeFlexVol": false

Re: Get-NcVolSize command not reporting volsize correctly when > 1024GB using Ontap Powershell T

lafoucrier — Fri, 30 Aug 2019 12:55:45 GMT

Hello Donny,

Is the last informations I give sufficient?

Did you have reproduce my issue?

thanks in advance,

Re: Get-NcVolSize command not reporting volsize correctly when > 1024GB using Ontap Powershell T

donny_lang — Fri, 30 Aug 2019 13:15:27 GMT

I am not able to replicate this issue, unfortunately. However, I do not have a system running 9.4 available to determine if it is something specific with that version - I have 9.3 in production and 9.6 in the lab; neither of them exhibit the same issue with version 9.6 of the PS Toolkit.

Re: Get-NcVolSize command not reporting volsize correctly when > 1024GB using Ontap Powershell T

lafoucrier — Fri, 30 Aug 2019 13:33:50 GMT

thank you for the tests.

During september I will update my FAS in 9.5 or 9.6, I'll retry test after that and update the thread.

Re: Get-NcVolSize command not reporting volsize correctly when > 1024GB using Ontap Powershell T

lafoucrier — Wed, 02 Oct 2019 11:39:51 GMT

Hello,

I've updated my FAS Arrays during september as I said i my earlier post, but I observe the same issue....

FAS2620 in 9.5P7

powershell module : 9.6.0

powershell server : Windows 2012R2 (6.3.9600)

Re: Get-NcVolSize command not reporting volsize correctly when > 1024GB using Ontap Powershell T

RajeshPanda — Fri, 18 Oct 2019 08:46:40 GMT

@donny_lang Can you please help @lafoucrier

Thanks

Rajesh

Re: Get-NcVolSize command not reporting volsize correctly when > 1024GB using Ontap Powershell T

lafoucrier — Mon, 06 Jan 2020 17:55:38 GMT

Hi Donny,

I've updated my FAS Arrays during september as I said i my earlier post, but I observe the same issue, is there any other test I can do to debug the situation (or maybe au workaround with another cmdlet)?

thanks in advance,

FAS2620 in 9.5P7

powershell module : 9.6.0

powershell server : Windows 2012R2 (6.3.9600) or Windows 2016

regards

Re: Get-NcVolSize command not reporting volsize correctly when > 1024GB using Ontap Powershell T

donny_lang — Mon, 06 Jan 2020 19:36:22 GMT

Sorry for the delay. On the larger than 1024GB volume, can you try to collect the volume size from Get-NcVol instead to see if that works:

Get-NcVol -Vserver <vserver> -Volume <volume> | fl TotalSize

It'll (theoretically) report the volume size in bytes, which should be a non-zero number. If that doesn't work, we can try to query it via the ZAPI call directly with Invoke-NcSystemApi and see if that yields any different output.

Re: Get-NcVolSize command not reporting volsize correctly when > 1024GB using Ontap Powershell T

lafoucrier — Tue, 07 Jan 2020 09:10:54 GMT

Hi Donny,

Thank you, this command works well.

What i'm trying to do initialy was a

Set-NcVolSize -NewSize <newSize> -Name <volname> -VserverContext <vservename>

but this command fail with the same behaviour as Get-NcVolSize

Do you also have a command to bypass this one?

thanks in advance

Yann

Re: Get-NcVolSize command not reporting volsize correctly when > 1024GB using Ontap Powershell T

donny_lang — Tue, 07 Jan 2020 14:18:05 GMT

Try with Invoke-NcSystemApi like this:

$Volume = "<your volume>"
$NewSize = "<desired size>"
$Vserver = "<your SVM>"

$Request = @"

  <volume-size>
    <new-size>$NewSize</new-size>
    <volume>$Volume</volume>
  </volume-size>

"@

Invoke-NcSystemApi -Request $Request -VserverContext $Vserver

Re: Get-NcVolSize command not reporting volsize correctly when > 1024GB using Ontap Powershell T

lafoucrier — Tue, 07 Jan 2020 16:04:02 GMT

Thank You Donny, your workaround is working.

any idea why both commandlet Get-NcVolSize an Set-NcVolSize will fail in my context?

thanks

Yann

Re: Get-NcVolSize command not reporting volsize correctly when > 1024GB using Ontap Powershell T

donny_lang — Tue, 07 Jan 2020 16:22:50 GMT

Glad it's working!

If I had to guess, I'd say it is a strange bug in the module for those two cmdlets.