topic FAS 8040 Upgrade to 9.0 or 9.0P4 Validation Failure in ONTAP Discussions

FAS 8040 Upgrade to 9.0 or 9.0P4 Validation Failure

sroy — Wed, 04 Jun 2025 11:13:05 GMT

Hello,

I have 3 different independent clusters that are all running 8.3.2 and I want to upgrade them into the 9.x stream.

1 x 8040 validates successfully. Need to get this up to 9.7

1 x 2240-2 validates successfully. Need to get this to 9.1

My other 8040 cluster is showing this error:

CLI output:

cluster image validate -version 9.0P4

It can take several minutes to complete validation...

Error: show failed: Both primary and backup images should be available for validation. One or both of them are not available

WebUI:

Failed to retrieve the validation information.

Reason: Validation failed because the software image selected for the validation is unavailable.

Click Retry to revalidate the cluster.

The only change that has occurred with this cluster is I have recently unjoined both a FAS3240 and FAS3250 from it.

Any idea on why this error is presenting itself?

Re: FAS 8040 Upgrade to 9.0 or 9.0P4 Validation Failure

SpindleNinja — Wed, 15 Apr 2020 16:50:24 GMT

what's the output of "cluster image package show"

Also, why 9.0P4? why not 9.1P latest?

Re: FAS 8040 Upgrade to 9.0 or 9.0P4 Validation Failure

sroy — Wed, 15 Apr 2020 17:08:58 GMT

cluster image package show
Package Version Package Build Time
---------------- ------------------
8.3.2P12 8/13/2017 20:57:01
9.0P4 6/17/2017 12:58:01
2 entries were displayed.

I don't have any issues moving to the latest 9.1, however it doesn't matter what version I upload to the 8040 will not validate.

cluster image package show
Package Version Package Build Time
---------------- ------------------
8.3.2P12 8/13/2017 20:57:01
9.0P4 6/17/2017 12:58:01
9.1P20 10/28/2019 08:37:28
3 entries were displayed.

cluster image validate -version 9.1P20

It can take several minutes to complete validation...

Error: show failed: Both primary and backup images should be available for validation. One or both of them are not available

Re: FAS 8040 Upgrade to 9.0 or 9.0P4 Validation Failure

SpindleNinja — Wed, 15 Apr 2020 17:17:11 GMT

Got ya. just wanted to check that.

how about... "set adv; system node image show -instance "

Re: FAS 8040 Upgrade to 9.0 or 9.0P4 Validation Failure

sroy — Wed, 15 Apr 2020 17:41:24 GMT

Found out there was still an old node still in the DB.

Ran debug smdb table cluster_package_ownership_rdb show

node role

------------------------------------ ---------

8153030e-4c2e-11e5-9d9c-85ebde5ee891 secondary

Deleted this GUID and the image can now be validated.

https://www.randomlyexpressed.com/cluster-image-package-command-fails/

Re: FAS 8040 Upgrade to 9.0 or 9.0P4 Validation Failure

SpindleNinja — Wed, 15 Apr 2020 17:52:41 GMT

set d; debug vreport show is another good one to run after you remove nodes.