topic Re: timeout on service-processor ssh session in ONTAP Discussions

timeout on service-processor ssh session

netappmagic — Wed, 04 Jun 2025 10:46:18 GMT

A700 SP ssh session, how do I reset the timeout parameter?

Any other nodes are fine, only these two A700's, and cluster ssh session is fine as well.

Thanks!

Re: timeout on service-processor ssh session

pedro_rocha — Thu, 05 Nov 2020 13:50:15 GMT

Which other nodes do you have in the cluster?

You are telling that the timeout for a ssh session to other nodes in the cluster is different? How different?

Re: timeout on service-processor ssh session

netappmagic — Thu, 05 Nov 2020 13:55:48 GMT

I am talking about SP connections to other nodes, and these nodes are A300, and A700 as well. Only these two AFF nodes timeout is short

Re: timeout on service-processor ssh session

pedro_rocha — Thu, 05 Nov 2020 14:00:03 GMT

Is it a single cluster?

[image: facebook] <>
[image: twitter] <>
[image: linkedin] <>
[image: instagram] <>
Pedro Rocha

Diretor

Pós-vendas | Garage Tech
+55 61 3963-1776 <+55+61+5555-5555> | +55 61 98203-5800 <+55+61+98203-5800>
pedro@grgtech.io
grgtech.io
SIG Quadra 2 Lote 420, Ed. City Offices, Brasília-DF, Brasil

Re: timeout on service-processor ssh session

netappmagic — Thu, 05 Nov 2020 20:37:35 GMT

yes, single cluster.

Re: timeout on service-processor ssh session

pedro_rocha — Thu, 05 Nov 2020 21:19:10 GMT

Interesting. I also did not find specific information on SP session timeout...

found only the "system timeout" command on the cluster shell.

I did test it on a 4-node cluster, and the SP session timeout on the nodes are respecting the value on the above mentioned command.

I would open a case to understand what is happening... on 7-mode systems there was an option for the SP session timeout... did not find it for ONTAP.

Regards,

Pedro