topic How to setup 1 data Aggregate with all disks in ONTAP Discussions https://community.netapp.com/t5/ONTAP-Discussions/How-to-setup-1-data-Aggregate-with-all-disks/m-p/163684#M37434 <P>Hello,</P><P>&nbsp;</P><P>I have a C190 all ssd with 12 disks total.&nbsp; Side A has 6 disks and Side B has the other 6 disks.&nbsp; My goal is to create 1 Data Agg with 11 disks and 1 spare while keeping the disks in their respective home locations.&nbsp; When I go to do a manual setup I can only setup a Agg per side and not just 1 using both sides.&nbsp; I know this is possible as I have another unit that is setup this way.&nbsp; I just don't know how it was done.&nbsp; The end storage model will be NFS.&nbsp; Any assistance would be appreciated.&nbsp; Ontap version is 9.7xxx</P><P>&nbsp;</P><P>Thank you!</P> Wed, 04 Jun 2025 10:36:27 GMT tinfoilhat 2025-06-04T10:36:27Z How to setup 1 data Aggregate with all disks https://community.netapp.com/t5/ONTAP-Discussions/How-to-setup-1-data-Aggregate-with-all-disks/m-p/163684#M37434 <P>Hello,</P><P>&nbsp;</P><P>I have a C190 all ssd with 12 disks total.&nbsp; Side A has 6 disks and Side B has the other 6 disks.&nbsp; My goal is to create 1 Data Agg with 11 disks and 1 spare while keeping the disks in their respective home locations.&nbsp; When I go to do a manual setup I can only setup a Agg per side and not just 1 using both sides.&nbsp; I know this is possible as I have another unit that is setup this way.&nbsp; I just don't know how it was done.&nbsp; The end storage model will be NFS.&nbsp; Any assistance would be appreciated.&nbsp; Ontap version is 9.7xxx</P><P>&nbsp;</P><P>Thank you!</P> Wed, 04 Jun 2025 10:36:27 GMT https://community.netapp.com/t5/ONTAP-Discussions/How-to-setup-1-data-Aggregate-with-all-disks/m-p/163684#M37434 tinfoilhat 2025-06-04T10:36:27Z Re: How to setup 1 data Aggregate with all disks https://community.netapp.com/t5/ONTAP-Discussions/How-to-setup-1-data-Aggregate-with-all-disks/m-p/163686#M37435 <P>You can remove ownership of all the P1 and P2 partitions. Then assign them all to one node.</P><P>&nbsp;</P><P>depending on workload, you could leave it as-is, create two aggregates and then create a FlexGroup that spans both controllers.</P> Wed, 03 Feb 2021 19:40:34 GMT https://community.netapp.com/t5/ONTAP-Discussions/How-to-setup-1-data-Aggregate-with-all-disks/m-p/163686#M37435 TMACMD 2021-02-03T19:40:34Z