topic Re: E2760 Stuck in ONTAP Discussions

E2760 Stuck

ExactLabSysAdmin — Wed, 04 Jun 2025 10:28:25 GMT

Hi,

My E2760 is stuck after a reboot. The error code in the seven digits is EA - EB . I tried to check on the support page what this sequence means but I didn't find it... Someone Can help me, please?

the video of the error:

https://www.dropbox.com/s/fes9ha8tfpm3po2/2021-04-06%2016.16.20.mp4?dl=0

Many thanks

Re: E2760 Stuck

SpindleNinja — Wed, 07 Apr 2021 11:16:01 GMT

Maybe EB could be E8? And could be bad memory?

EA EA DDR3 training failed.
E8 E8 No memory installed.

https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Systems/E-Series_Storage_Array/E-Series_Controller_7-Segment_Display_shows_'E8'

https://docs.netapp.com/sgws-110/topic/com.netapp.doc.sg-app-install/GUID-BA0FDA9B-96EE-4C9D-959C-797644228D15.html

Re: E2760 Stuck

ExactLabSysAdmin — Wed, 07 Apr 2021 11:44:16 GMT

Hi SpindleNinja,

thanks but it's not E8 because it "Eb" .... could be E6? I don't find other pages that you attached to me ... so perhaps it's broken the 2 LEDs in the seven digits display? It's too strange ... or I'm definitely unlucky!

Re: E2760 Stuck

SpindleNinja — Wed, 07 Apr 2021 21:22:41 GMT

I was able to find this doc, that's more specific to the 27xx line, but I don't see anything close to things starting with E_

starting page 127

https://library.netapp.com/ecm/ecm_download_file/ECMLP2344477

the EA etc align more with the 2800/5700:

https://library.netapp.com/ecmdocs/ECMLP2773529/html/GUID-13CFCCFB-7D0A-48B0-AFE9-FD60744C84FB.html

Re: E2760 Stuck

NetApp_AU — Thu, 08 Apr 2021 02:06:50 GMT

The error code definitely looks like EA Eb. The number "6" looks a little different than "b" on the seven segment display. See picture below for reference.

EA and Eb/EB can mean several different things for example:

EA : DDR3 training failed
EA : Boot Loader start of loading the system file

Eb :: Boot Loader prior to entering the boot manipulation menu

To really know what is happening to the controller, open a support case so a TSE can access the serial connection to investigate the issue from the controller shell. Serial access on E-Series is only for Support use so a support case is your best option.