Unable to boo the Netapp storage FAS3240 PANIC: sanown: not enough filer table entries in SK pro

TOPHAN — Tue, 26 Jun 2018 13:41:22 GMT

SP MUNC1Netapp1-a> system console
User naroot has an active console session.
Would you like to disconnect that session, and start yours [y/n]? y
Type Ctrl-D to exit.

+++++++++++++++++++

CPU Type: Intel(R) Xeon(R) CPU L5410 @ 2.33GHz

Starting AUTOBOOT press Ctrl-C to abort...
Loading X86_64/freebsd/image2/kernel:0x100000/8455008 0x910360/1278312 Entry at 0x80158990
Loading X86_64/freebsd/image2/platform.ko:0xa49000/655152 0xb97c40/694752 0xae8f40/39656 0xc41620/43152 0xaf2a28/86316 0xb07b54/63858 0xb174e0/140640 0xc4beb0/159120 0xb39a40/2024 0xc72c40/6072 0xb3a228/304 0xc743f8/912 0xb3a358/1680 0xc74788/5040 0xb3a9e8/960 0xc75b38/2880 0xb3ada8/184 0xc76678/552 0xb3ae60/448 0xb6f000/12918 0xb97b53/237 0xb72278/84120 0xb86b10/69699
Starting program at 0x80158990
NetApp Data ONTAP 8.1.4P4 7-Mode
Copyright (C) 1992-2014 NetApp.
All rights reserved.
md1.uzip: 25536 x 16384 blocks
md2.uzip: 5760 x 16384 blocks
*******************************
* *
* Press Ctrl-C for Boot Menu. *
* *
*******************************
Chelsio T3 RDMA Driver - version 0.1
Ipspace "iwarp-ipspace" created
Jun 26 12:58:43 [localhost:fci.adapter.link.online:info]: Fibre Channel adapter 0c link online.
Jun 26 12:58:43 [localhost:fci.nserr.noDevices:error]: The Fibre Channel fabric attached to adapter 0c reports the presence of no Fibre Channel devices.
Jun 26 12:58:43 [localhost:fci.adapter.link.online:info]: Fibre Channel adapter 0d link online.
Jun 26 12:58:43 [localhost:fci.nserr.noDevices:error]: The Fibre Channel fabric attached to adapter 0d reports the presence of no Fibre Channel devices.
Cluster monitor: warning: firmware partner-sysid variable is not set
Jun 26 12:58:52 [localhost:diskown.isEnabled:info]: software ownership has been enabled for this system
Jun 26 12:58:52 [loPANIC : sanown: not enough filer table entries
version: 8.1.4P4: Sat Jun 28 01:52:51 PDT 2014
conf : x86_64
cpuid = 0
Uptime: 46s

PANIC: sanown: not enough filer table entries in SK process sanown_io on release 8.1.4P4 on Tue Jun 26 12:58:52 GMT 2018

version: 8.1.4P4: Sat Jun 28 01:52:51 PDT 2014
compile flags: x86_64
Writing panic info to HA mailbox disks.
HA: current time (in sk_msecs) 22601 (in sk_cycles) 251767824098
DUMPCORE: START
Raid assimilation incomplete

DUMPCORE: END -- coredump *NOT* written.
Dumpcore failed
coredump: primary dumper failed -1.
coredump: trying secondary dumper...
no tftp server ip specified
netdump: no targets available to dump
coredump: secondary dumper failed -1.
Logging shutdown event to the SP...
System halting...
cpu_reset called on cpu#0
▒
Phoenix TrustedCore(tm) Server
Copyright 1985-2006 Phoenix Technologies Ltd.
All Rights Reserved
BIOS version: 5.3.0
Portions Copyright (c) 2007-2014 NetApp, Inc. All Rights Reserved

CPU = 1 Processors Detected, Cores per Processor = 4
Intel(R) Xeon(R) CPU L5410 @ 2.33GHz
Testing RAM
512MB RAM tested
8192MB RAM installed
6144 KB L2 Cache
System BIOS shadowed
USB 2.0: MICRON eUSB DISK
BIOS is scanning PCI Option ROMs, this may take a few seconds...
+++++++++++++++++++

CPU Type: Intel(R) Xeon(R) CPU L5410 @ 2.33GHz
LOADER-A>

============================================================================

LOADER-A> set-defaults
LOADER-A> boot_ontap
Loading X86_64/freebsd/image2/kernel:0x100000/8455008 0x910360/1278312 Entry at 0x80158990
Loading X86_64/freebsd/image2/platform.ko:0xa49000/655152 0xb97c40/694752 0xae8f40/39656 0xc41620/43152 0xaf2a28/86316 0xb07b54/63858 0xb174e0/140640 0xc4beb0/159120 0xb39a40/2024 0xc72c40/6072 0xb3a228/304 0xc743f8/912 0xb3a358/1680 0xc74788/5040 0xb3a9e8/960 0xc75b38/2880 0xb3ada8/184 0xc76678/552 0xb3ae60/448 0xb6f000/12918 0xb97b53/237 0xb72278/84120 0xb86b10/69699
Starting program at 0x80158990
NetApp Data ONTAP 8.1.4P4 7-Mode
Copyright (C) 1992-2014 NetApp.
All rights reserved.
md1.uzip: 25536 x 16384 bl^Cocks
md2.uzip: 5760 x 16384 blocks
*******************************
* *
* Press Ctrl-C for Boot Menu. *
* *
*******************************
^CBoot Menu will be available.
^C^C^C^C^C^C^C^C^C^C^C^C
Please choose one of the following:

(1) Normal Boot.
(2) Boot without /etc/rc.
(3) Change password.
(4) Clean configuration and initialize all disks.
(5) Maintenance mode boot.
(6) Update flash from backup config.
(7) Install new software first.
(8) Reboot node.
Selection (1-8)? 5
Chelsio T3 RDMA Driver - version 0.1
Ipspace "iwarp-ipspace" created
Jun 26 13:01:19 [localhost:fci.adapter.link.online:info]: Fibre Channel adapter 0c link online.
Jun 26 13:01:19 [localhost:fci.nserr.noDevices:error]: The Fibre Channel fabric attached to adapter 0c reports the presence of no Fibre Channel devices.
Jun 26 13:01:19 [localhost:fci.adapter.link.online:info]: Fibre Channel adapter 0d link online.
Jun 26 13:01:19 [localhost:fci.nserr.noDevices:error]: The Fibre Channel fabric attached to adapter 0d reports the presence of no Fibre Channel devices.
Cluster monitor: warning: firmware partner-sysid variable is not set
Jun 26 13:01:28 [localhost:diskown.isEnabled:info]: software ownership has been enabled for this system
Jun 2PANIC : sanown: not enough filer table entries
version: 8.1.4P4: Sat Jun 28 01:52:51 PDT 2014
conf : x86_64
cpuid = 0
Uptime: 49s

PANIC: sanown: not enough filer table entries in SK process sanown_io on release 8.1.4P4 on Tue Jun 26 13:01:28 GMT 2018

version: 8.1.4P4: Sat Jun 28 01:52:51 PDT 2014
compile flags: x86_64
Writing panic info to HA mailbox disks.
HA: current time (in sk_msecs) 21427 (in sk_cycles) 348330384325
DUMPCORE: START
Raid assimilation incomplete

CPU Type: Intel(R) Xeon(R) CPU L5410 @ 2.33GHz
LOADER-A>

Re: Unable to boo the Netapp storage FAS3240 PANIC: sanown: not enough filer table entries in SK pro

Arnoldo — Sat, 08 May 2021 14:32:33 GMT

Did you find a solution for this problem?

topic Re: Unable to boo the Netapp storage FAS3240 PANIC: sanown: not enough filer table entries in SK pro in ONTAP Discussions

Unable to boo the Netapp storage FAS3240 PANIC: sanown: not enough filer table entries in SK pro

Re: Unable to boo the Netapp storage FAS3240 PANIC: sanown: not enough filer table entries in SK pro