https://community.netapp.com/t5/ONTAP-Discussions/How-to-change-ATTO7500N-FCConnMode-from-loop-to-ptp/m-p/170019#M39092 <P>I assume you have them set to auto right now.</P><P>The best way is:</P><OL><LI>disable the switch port</LI><LI>change the value on the bridge</LI><LI>enable the switch port</LI></OL><P>ak.</P> Thu, 16 Sep 2021 09:44:45 GMT akiendl 2021-09-16T09:44:45Z https://community.netapp.com/t5/ONTAP-Discussions/How-to-change-ATTO7500N-FCConnMode-from-loop-to-ptp/m-p/170017#M39090 <P>&nbsp; &nbsp; &nbsp; &nbsp; I want to modify the ATTO bridge 7500N FCConnMode, but I am not sure whether to disable the corresponding FC switch port. After modifying the FCConnMode parameter, enable the switch port. Is this step necessary?</P><P>&nbsp; &nbsp; &nbsp; &nbsp; I do not know which engineer has the experience to modify this parameter, whether the modification of this parameter will cause link interruption or no impact, hope to get a reply!</P> Wed, 04 Jun 2025 10:13:43 GMT https://community.netapp.com/t5/ONTAP-Discussions/How-to-change-ATTO7500N-FCConnMode-from-loop-to-ptp/m-p/170017#M39090 wzndragon 2025-06-04T10:13:43Z https://community.netapp.com/t5/ONTAP-Discussions/How-to-change-ATTO7500N-FCConnMode-from-loop-to-ptp/m-p/170019#M39092 <P>I assume you have them set to auto right now.</P><P>The best way is:</P><OL><LI>disable the switch port</LI><LI>change the value on the bridge</LI><LI>enable the switch port</LI></OL><P>ak.</P> Thu, 16 Sep 2021 09:44:45 GMT https://community.netapp.com/t5/ONTAP-Discussions/How-to-change-ATTO7500N-FCConnMode-from-loop-to-ptp/m-p/170019#M39092 akiendl 2021-09-16T09:44:45Z