Netapp volume resync is not working through ansible

nasadmin1 — Wed, 04 Jun 2025 09:46:05 GMT

Netapp for volume resync is not working through ansible, state is showing Broken off, but status is showing as Idle from transferring.

abc::*> snapmirror show -vserver ansibledtest-cdr -fields lag-time , state ,status ,last-transfer-error
source-path destination-path state status last-transfer-error lag-time
------------------------- --------------------------------- ---------- ------ ------------------- --------
svm-vfp:ansible_test_vol ansibledtest-cdr:ansible_test_vol Broken-off Idle -

However, the status should be as below.

abc::*> snapmirror show -vserver ansibledtest-cdr -fields lag-time , state ,status ,last-transfer-error
source-path destination-path state status last-transfer-error lag-time
------------------------- --------------------------------- ------------ ------ ------------------- --------
svm-vfp:ansible_test_vol ansibledtest-cdr:ansible_test_vol Snapmirrored Idle - 0:0:49

Re: Netapp volume resync is not working through ansible

Sergey_Osipov — Fri, 18 Aug 2023 11:35:06 GMT

Could you please elaborate here?

What do you mean by "snapmirror resync is not working"?

Is it not started at all or failing with any error?

If it is not started at all can you check audit.log for the RestAPI call incoming and what is happening with it?

If the resync is started and fails then what is the error?

Does resync work if issued from cli or fails with the same error?

topic Netapp volume resync is not working through ansible in ONTAP Discussions

Netapp volume resync is not working through ansible

Re: Netapp volume resync is not working through ansible