topic Failed snapshot during SIS start has used up all free space in Volume - Help! in ONTAP Discussions https://community.netapp.com/t5/ONTAP-Discussions/Failed-snapshot-during-SIS-start-has-used-up-all-free-space-in-Volume-Help/m-p/18555#M4376 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>I have a FAS2050 running version 7.3.1.1. I recently turned on SIS for two of our volumes which both hard around 15-20% of disk space free. Both volumes did not have any snapshot schedules and had never run a snapshot. However when I went start SIS on each of the volumes it returned with an error that it could not start as the snapshot had failed due to low disk space. When i then looked at the diskspace there was 0B left and it was a 100% full. I then turned off SIS through command line (however it is still shown under status in the manage volumes page on FilerView) the space is not reclaimed back and also when i grow the volume the space is taken up straight away and is show as 100% full. How can i reverse what has happened and reclaim the space which seems to be taken by a snapshot which doesn't exist when I go to manage snapshots for the volume. Thank you</P><P></P><P>Regards,</P><P></P><P>Kiran</P></BODY></HTML> Thu, 05 Jun 2025 06:38:17 GMT tom_woollard 2025-06-05T06:38:17Z Failed snapshot during SIS start has used up all free space in Volume - Help! https://community.netapp.com/t5/ONTAP-Discussions/Failed-snapshot-during-SIS-start-has-used-up-all-free-space-in-Volume-Help/m-p/18555#M4376 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>I have a FAS2050 running version 7.3.1.1. I recently turned on SIS for two of our volumes which both hard around 15-20% of disk space free. Both volumes did not have any snapshot schedules and had never run a snapshot. However when I went start SIS on each of the volumes it returned with an error that it could not start as the snapshot had failed due to low disk space. When i then looked at the diskspace there was 0B left and it was a 100% full. I then turned off SIS through command line (however it is still shown under status in the manage volumes page on FilerView) the space is not reclaimed back and also when i grow the volume the space is taken up straight away and is show as 100% full. How can i reverse what has happened and reclaim the space which seems to be taken by a snapshot which doesn't exist when I go to manage snapshots for the volume. Thank you</P><P></P><P>Regards,</P><P></P><P>Kiran</P></BODY></HTML> Thu, 05 Jun 2025 06:38:17 GMT https://community.netapp.com/t5/ONTAP-Discussions/Failed-snapshot-during-SIS-start-has-used-up-all-free-space-in-Volume-Help/m-p/18555#M4376 tom_woollard 2025-06-05T06:38:17Z Re: Failed snapshot during SIS start has used up all free space in Volume - Help! https://community.netapp.com/t5/ONTAP-Discussions/Failed-snapshot-during-SIS-start-has-used-up-all-free-space-in-Volume-Help/m-p/18558#M4377 <HTML><HEAD></HEAD><BODY><P>Can you post the output for the following commands "vol status -v", "df", "df -A", "df -r", "snap list", "sis status -l"</P></BODY></HTML> Fri, 06 Jan 2012 10:37:12 GMT https://community.netapp.com/t5/ONTAP-Discussions/Failed-snapshot-during-SIS-start-has-used-up-all-free-space-in-Volume-Help/m-p/18558#M4377 stsadmin 2012-01-06T10:37:12Z