topic Re: Process of switching equipment on and off in ONTAP Discussions

Process of switching equipment on and off

wareer — Mon, 30 Sep 2024 03:41:28 GMT

Assume that the equipment room is to be constructed, and all the equipment (servers. Switches. Storage) are shut down and shut down, some of which have vmware running on them. Can you give me a shutdown and startup process sequence?

Prevents data loss and other hardware problems.

Re: Process of switching equipment on and off

Sanaman — Tue, 01 Oct 2024 01:22:27 GMT

If you have two sites then you can storage vMotion to the surviving site and shutdown ESX/servers then storage and then switches. If not power-off VMs, ESX then storage and switches. This how I did two months ago for DC move (in metro environment).

Otherwise (single site)

Power off VMs

Power off ESX/Servers

Power off STorage and switches.

Power up them in reverse order (switches and storage first).

Re: Process of switching equipment on and off

Amador — Tue, 01 Oct 2024 06:36:24 GMT

From a NetApp perspective, we cover multiple power off/on activities at Gracefully shutdown and power up your storage system Resolution Guide - NetApp Knowledge Base

In particular, for ONTAP systems: How to perform graceful shutdown and power up of all ONTAP nodes in a cluster - NetApp Knowledge Base

Re: Process of switching equipment on and off

liu — Wed, 09 Oct 2024 05:35:06 GMT

hello

Here is what needs to be done. Switch on the power of disk shelves, and power up the controllers. Details can be found in the link.

https://kb-cn.netapp.com/on-prem/ontap/OHW/OHW-KBs/How_to_power_up_all_ONTAP_nodes_in_a_cluster_following_a_graceful_shutdown#