Disk Pool Failed - Volume: Over Threshold

NSE_IT — Sat, 26 Oct 2024 21:03:20 GMT

Hi There,

I'm facing an issue with our Netapp, where the repository reached 100% of capacity usage which led to a Failed Disk pool and an over threshold Volume

For information,

Disk pool Capacity: 400 TB

Volume: 50TB

Repository: 10TB

The setting for the Thin Volume was set to "Manual"

I can increase volume capacity but I can't increase the Repository capacity, I always git an error message:

Error 651 - The operation cannot complete because the repository volume associated with the reserved capacity is in a failed state.

Operation when error occurred: PROC_expandConcatVolume

Also, when I try to change the setting for the Thin Volume to "Automatic", I'm getting this error:

Error 18 - The operation cannot complete because of an internal target error. Please retry the operation. If this message persists, contact your Technical Support Representative.

Operation when error occurred: PROC_setThinVolumeCapacityThreshold

Can you please advise how to do to solve this issue, since the storage is no more available on the ESXi servers

Best Regards,

Re: Disk Pool Failed - Volume: Over Threshold

Krishnadas — Tue, 29 Oct 2024 05:13:34 GMT

Above error should be on SANTRICITY OS? What is the version of the code running? Have you tried expanding the Volume?

Re: Disk Pool Failed - Volume: Over Threshold

Amitra — Tue, 29 Oct 2024 05:33:28 GMT

HI @NSE_IT ,

Considering there is a disk pool failure, I recommend reaching out to NetApp Support by creating a case.

topic Re: Disk Pool Failed - Volume: Over Threshold in ONTAP Discussions

Disk Pool Failed - Volume: Over Threshold

Re: Disk Pool Failed - Volume: Over Threshold

Re: Disk Pool Failed - Volume: Over Threshold