topic Re: hi following is the scenario could you please help? in ONTAP Discussions

hi following is the scenario could you please help?

ABHINAVSRIVASTAV667 — Thu, 05 Jun 2025 06:08:29 GMT

An Error event on Active/Active Controller filer name Global Status: NonCritical; /vol/name_rdm is full (using or reserving 100% of space and 0% of inodes, using 100% of reserve)

what's the cause of above I am new to NetApp?

it's san architecture

although vol size has been increased.

but some other solution.....

Re: hi following is the scenario could you please help?

SRIKANTH1221 — Wed, 06 Mar 2013 06:27:35 GMT

Hi Abhinav,

If possible can you provide the df -h <volume_name >

so that we can get a clear picture

Re: hi following is the scenario could you please help?

VKALVEMULA — Wed, 06 Mar 2013 17:17:53 GMT

do you have any LUN in that volume

Re: hi following is the scenario could you please help?

ABHINAVSRIVASTAV667 — Thu, 07 Mar 2013 03:56:55 GMT

df -h <<vol_name_rdm>>
Filesystem total used avail capacity Mounted on
/vol/<<vol_name_rdm>>/ 900GB 542GB 357GB 60% /vol/<<vol_name_rdm>>/
/vol/<<vol_name_rdm>>/.snapshot 0GB 191GB 0GB ---% /vol/vol_name_rdm/.snapshot

Re: hi following is the scenario could you please help?

ABHINAVSRIVASTAV667 — Thu, 07 Mar 2013 03:57:37 GMT

@vijay reddy Yes

Re: hi following is the scenario could you please help?

VKALVEMULA — Thu, 07 Mar 2013 16:06:09 GMT

can you send snap list volname

Re: hi following is the scenario could you please help?

ABHINAVSRIVASTAV667 — Fri, 08 Mar 2013 04:14:56 GMT

Hi Vijay,

I think what you would be suggesting do delete the snap shots which are old and heavy.

but I don't want to go that way.

Re: hi following is the scenario could you please help?

kumaraysun — Fri, 08 Mar 2013 15:42:55 GMT

hi Abhinav,

can you give vol status vol_name_rdm and also vol options vol_name_rdm here please

Re: hi following is the scenario could you please help?

VKALVEMULA — Mon, 11 Mar 2013 15:32:17 GMT

i wanted to check whether the snaps are tied up with clones

Re: hi following is the scenario could you please help?

SRIKANTH1221 — Tue, 18 Jun 2013 05:26:32 GMT

If the lun space reservation is enabled then it takes the exact amount of space from volume for modification of data in the Lun

suppose let us assume that volume of 1 TB and u have created the lun with 200 GB and you enabled the sapce reservation while creating the LUN then it takes 250 GB for the lun and another 250 GB for the space reservation

this may cause the problem

sorry the delay reply