topic Re: SnapMirror between Data ONTAP Edge in ONTAP Discussions

SnapMirror between Data ONTAP Edge

SEACRETPLACE — Thu, 05 Jun 2025 06:14:36 GMT

Hi Folks,

I'm trying to build demo environment with VMware vCenter Site Recovery Manager and Data ONTAP Edge.

Is it possible to create snapmirror relation between Data ONTAP Edges.

I can create snapmirror relation (Site A -> Site B) with Oncommand GUI.

But I cannot initialize the relation with error "cannot connect to source filer (13201)"

Site A:

Windows: 192.168.42.1

vCenter Server 5.1

Site Recovery Manager 5.1

Oncommend 2.0

ESXi: 192.168.42.41, 192.168.44.41

Data ONTAP Edge: 192.168.44.82

Site B:

Windows: 192.168.52.1

vCenter Server 5.1

Site Recovery Manager 5.1

Oncommend 2.0

ESXi: 192.168.52.41, 192.168.54.41

Data ONTAP Edge: 192.168.54.82

All networks are 24bits-masked and are routed by one Vyatta VM without firewall settings.

ping test OK:

192.168.44.82 (ontap) <-> 192.168.54.82 (ontap)

telnet test OK:

192.168.42.1 (win site A) -> 192.168.44.82:{10566,10569} (ontap site A)

192.168.52.1 (win site B) -> 192.168.44.82:{10566, 10569} (ontap site A)

192.168.42.1 (win site A) -> 192.168.54.82:{10566,10569} (ontap site B)

192.168.52.1 (win site B) -> 192.168.54.82:{10566, 10569} (ontap site B)

Thanks in advance

-mitsutaka

Re: SnapMirror between Data ONTAP Edge

jamesj — Mon, 03 Dec 2012 18:59:32 GMT

I believe only Data ONTAP Edge-T provides SnapMirror capabilities.

Here is a datasheet comparing the two:

http://media.netapp.com/documents/ds-data-ontap-edge.pdf

Re: SnapMirror between Data ONTAP Edge

SEACRETPLACE — Sun, 09 Dec 2012 07:14:28 GMT

Hi Jamie,

Thanks for your advice.

I could resolve this problem with following action.

1. add naming resolution

2. add setting for remote access (snapmirror.allow)

I demonstrated this SRM 5.1 Demo Env. with ONTAP Edges at VMware booth in NetApp Innovation 2012 Tokyo, 6th Dec.

These ONTAP Edges runs on a physical ONTAP, thus this is "Nested ONTAP". furthermore this env. runs with nested ESXi and nested ONTAP.

# Nested ONTAP is not compatible configuration for ONTAP Edge.

I had built this env. for few days even though I had no experience for ONTAP.

I'm impressed ease of use with ONTAP and I think netapp dedup should be highly evaluated widely.

Caution: unfortunately ONTAP Edge is not certified storage as nfs/iscsi datastores by VMware.

check VMware compatibility guide http://www.vmware.com/resources/compatibility/search.php

** 1.

- login the console of a ONTAP Edge

- enter "setup"

- after some questions, you can find a question whether you enable DNS service or not. Enable it.

- finish all of "setup" questions.

- reboot

- check that DNS service is enabled on OnCommand.

take same procedure with another ONTAP Edge.

probably you can add combinations of hosts and ip addresses at "Network Files".

** 2.

- login to OnCommand

- Open ONTAP Edge

- navigate "system name" > "SnapMirror" > "Remote Access" > "Add"

Remote System: the name of another ONTAP Edge

Volume or Qtree: All_volumes

take same procedure with another ONTAP Edge.

Thanks.

-mitsutaka