topic Re: FilerView not accessible on DataOntap 8.1.R3 7mode on fas2040 ( IBM N3400) in ONTAP Discussions

FilerView not accessible on DataOntap 8.1.R3 7mode on fas2040 ( IBM N3400)

gokhancakir — Thu, 05 Jun 2025 06:27:50 GMT

Hi everyone,

I recently upgrade our filer from dataontap 7.3.6 to 8.1.R3. after upgrade i checked i can't access FilerView. I am not sure can i access before upgrade.

when i list under http folder it's looking empty. i downloaded again ontap 8.1.R3 but nothing changed.

here is outputs;

n3400-b*> ls /vol/vol0/home/http

n3400-b*>

n3400-b*> options http

httpd.access legacy

httpd.admin.access legacy

httpd.admin.enable on

httpd.admin.hostsequiv.enable off

httpd.admin.max_connections 512

httpd.admin.ssl.enable on

httpd.admin.top-page.authentication on

httpd.autoindex.enable off

httpd.bypass_traverse_checking off

httpd.enable off

httpd.ipv6.enable off

httpd.log.format common (value might be overwritten in takeover)

httpd.method.trace.enable off

httpd.rootdir /vol/vol0/home/http

httpd.timeout 300 (value might be overwritten in takeover)

httpd.timewait.enable off (value might be overwritten in takeover)

Thanks for help..

Re: FilerView not accessible on DataOntap 8.1.R3 7mode on fas2040 ( IBM N3400)

cedric_renauld — Wed, 09 May 2012 07:55:52 GMT

Hi, Sorry but until the 8.1 the FilerView is deprecated,

you can download the onCommand System manager to manager your NSerie

Re: FilerView not accessible on DataOntap 8.1.R3 7mode on fas2040 ( IBM N3400)

gokhancakir — Wed, 09 May 2012 08:12:19 GMT

Thanks Cedric, I already using ssh and system manager for manage my filer. but some settings ( like nfs permission and config) Filerview is really helpful.

we have to wait thanks again..

Re: FilerView not accessible on DataOntap 8.1.R3 7mode on fas2040 ( IBM N3400)

arunchak — Thu, 10 May 2012 01:16:32 GMT

Right, but system manager has easier work-flows and much better manageability. Filer view is out dated. To add to it, you can manage multiple (c-mode as well as 7-mode) systems through system manager.

Re: FilerView not accessible on DataOntap 8.1.R3 7mode on fas2040 ( IBM N3400)

esutiawan — Thu, 10 May 2012 02:16:23 GMT

Yeah, system manager much more capabilities than filler view, but on client must be installation the program. different with filer view, after installation, customer just point ip address to the web browser to manage it, little easy...:). Some time system manager very slow too . better using command line for geek user...