topic Re: vol status -v on Ontap8.01 missing autosize settings output! in ONTAP Discussions

vol status -v on Ontap8.01 missing autosize settings output!

syscare_support — Thu, 05 Jun 2025 07:00:19 GMT

I am trying to get the autosize information for all of my volumes on Ontap8.01

In Ontap7.3.x If I ran vol status -v I got the following output at the bottome of each volumes information:

Volume autosize settings:
                                state=on
                                maximum-size=180 GB
                                increment-size=7680 MB

In Ontap8.01 this information is no longer there!

Is there a new command? I realise I can run this per vol using the vol autosize command but I want an output for all my volumes from one command.

Re: vol status -v on Ontap8.01 missing autosize settings output!

chriszurich — Mon, 14 Feb 2011 14:01:32 GMT

Interesting, I just obeserved the same issue. I wonder if NetApp could fix this within a service pack. You would think that -v output would include ALL information about a volume.

vol status -v on Ontap8.01 missing autosize settings output!

paul_wolf — Wed, 24 Aug 2011 12:21:51 GMT

I'm running 8.0.1P3 and I see the same issue. No autosize information is shown.

vol status -v on Ontap8.01 missing autosize settings output!

jakob_bena — Tue, 06 Sep 2011 06:53:12 GMT

hi,

i have installed on a filer ONTAP8.0.2. there is the autosize information available.

regards