topic Re: Problem add storage controller in oncommand core - Netapp V3240 in ONTAP Discussions

Problem add storage controller in oncommand core - Netapp V3240

hudanramadhona — Thu, 05 Jun 2025 06:11:56 GMT

Hi All,

i have problem when try to add storage controller in oncommand core.

Error: Can't contact new host 10.224.168.19 with SNMP or host agent protocol.
For host agents, make sure that host agent is installed and running on the
host. For vFilers, please add the vFiler's hosting physical storage system.
For other hosts, make sure SNMP is enabled on the host.
Run 'dfm host diag 10.224.168.19' to troubleshoot

Can anyone know how to resolve this?

Thanks and Regards

Re: Problem add storage controller in oncommand core - Netapp V3240

ogra — Mon, 21 Jan 2013 08:46:25 GMT

Is there any firewall port b/w the OnCommand server and the storage controllers ?

It seems the SNMP port is blocked b/w the 2 and hence there is no connectivity.

SNMP is started by default in the NetApp controller. However, you should check the SNMP version and if your SNMP_V3 the correct credential.

Re: Problem add storage controller in oncommand core - Netapp V3240

hudanramadhona — Mon, 21 Jan 2013 09:16:55 GMT

what ports should I open?

Re: Problem add storage controller in oncommand core - Netapp V3240

ogra — Wed, 23 Jan 2013 13:08:04 GMT

SNMP port to add the controller from OnCommand server.

Re: Problem add storage controller in oncommand core - Netapp V3240

AGUMADAVALLI — Thu, 24 Jan 2013 19:06:45 GMT

Re-generate the SSL keys using the command "secureadmin ssl setup", try it - it will work out.

thank you

AK G