topic Re: NDMP and TSM to backup N6040 in ONTAP Discussions

NDMP and TSM to backup N6040

PASCAL_PETIT — Thu, 05 Jun 2025 06:38:00 GMT

Hi falks,

Best wishes for 2012

Does someone know what type of IO is generated (normal or sequential) during backup node type=backupimage (TSM command)?

I checked with TPC and see only normal read IO during backup (I expected sequential IO), so when we performed a full backup we have bad performance due to disk (SATA) and only read cache hit ratio to 40%.

Read cache hit ratio is checked on backend (DS8700), do you know a tool to check on N6040?

Do you know a way to improve backup performance?

FYI we have same performance pb with some big volumes (10T) or little volumes (300G)

Thank you for your help

Re: NDMP and TSM to backup N6040

PASCAL_PETIT — Mon, 09 Jan 2012 10:20:17 GMT

No ideas?

Re: NDMP and TSM to backup N6040

radek_kubka — Mon, 09 Jan 2012 16:41:20 GMT

Hi,

I think with full backup there is not many ways to improve the performance, as you are doing a lot of sequential reads, which ONTAP doesn't like too much (I have no idea why TPC is reporting there is no sequential IO - this is wrong in my opinion)

If we are talking about incremental backups, then TSM 6.1 or later is definitely better than earlier versions performance-wise:

“NetApp Snapshot Difference API enables TSM to reduce the time required for progressive incremental file backups by eliminating client filesystem scans.”

http://www.enterprisestrategygroup.com/2009/04/esg-lab-validation-report-ibm-tsm-6-1-unified-data-protection-and-recovery-management/

Regards,

Radek

Re: NDMP and TSM to backup N6040

PASCAL_PETIT — Tue, 10 Jan 2012 16:33:43 GMT

Hello radek,

Find hereunder some screeshots from TPC, there was no other disk activities except TSM backup with NDMP.

There is no sequential IO during backup (backend is 6 SATA disk ranks on DS8700).

Some ideas?