topic Re: E5700 ssh remote login in EF & E-Series, SANtricity, and Related Plug-ins

E5700 ssh remote login

gfz-marco — Wed, 29 Aug 2018 07:48:44 GMT

Hello

We just got two E5700 and can't figure out how to login using ssh.

Webgui works fine, admin user/password is configured but the same user/pw that works for the webgui won't work with ssh.

What are we doing wrong?

Cheers

Marco

Re: E5700 ssh remote login

PabloZorzoli — Wed, 29 Aug 2018 12:11:44 GMT

Hey @gfz-marco

Have you enabled remote login?

Hardware -> Show back of shelf -> Select controller A -> Change Remote Login

That should guide you through enabling ssh access

cheers,

Pablo

Re: E5700 ssh remote login

gfz-marco — Wed, 29 Aug 2018 12:43:02 GMT

Hi Pablo

We already activated Remote Login on Controller B and we can connect via ssh, but when trying to login as "admin", the same user we use on the webgui, we just can't logon to the console.

Webgui: admin/pw - ok

ssh: admin/pw - fail

Cheers

Marco

Re: E5700 ssh remote login

MitchBlackburn — Wed, 29 Aug 2018 15:19:40 GMT

You won't be able to use the same user/passwd to access the shell as you use to access the gui. I recommend you contact support for information on access using ssh. Is there some specific task you are trying to perform that you believe requires ssh access?

Re: E5700 ssh remote login

gfz-marco — Thu, 30 Aug 2018 06:13:47 GMT

Hi Mitch

This begs the question why the customer can activate but not use the remote login (ssh) in the first place?

Our intention was to get more detailed information and options.

For example, the sensors in the gui just show the state "optimal", which is nice but doesn't help if it comes to syslogging exact data and events.

We have configured syslog in the settings, but would like to compare the data "low level", thus using a shell.

If this is not an option for the customer ... ok

Cheers

Marco

Re: E5700 ssh remote login

PabloZorzoli — Thu, 30 Aug 2018 09:09:00 GMT

- what about diag/admin pw.

Re: E5700 ssh remote login

gfz-marco — Thu, 30 Aug 2018 10:52:41 GMT

Works!

Great, thx Pablo

Re: E5700 ssh remote login

FabioGalifi — Thu, 27 Sep 2018 14:34:40 GMT

Marco, please, can you explain wich steps you used? I have the same issue.

Re: E5700 ssh remote login

JacopoCeccaroni — Thu, 27 Sep 2018 16:19:29 GMT

I have the same issue... can you explain please?

Many thanks in advance!

Re: E5700 ssh remote login

PabloZorzoli — Fri, 28 Sep 2018 15:19:13 GMT

Hardware -> Show back of shelf -> Select controller A -> Change Remote Login

then to log in user=diag and password is the admin password

Re: E5700 ssh remote login

Arun_K — Mon, 10 May 2021 14:52:30 GMT

Works well, Thanks for posting.