topic Re: Santricity E2600 Array in EF & E-Series, SANtricity, and Related Plug-ins

Santricity E2600 Array

harveypny — Wed, 04 Jun 2025 13:48:17 GMT

This is the only place it is letting me post this question. But I have an older E2600 Array. I have a cache battery that needs to replaced in one of my controllers. I need to mute the alarm. If I hit the button on the unit, it will just mute for 1 seconds and start up again. I have searched through the entire Santricity application, and the manual. It doesn't show you how to mute this thing until you get a replacement battery.

Re: Santricity E2600 Array

Michael_Price — Tue, 24 Apr 2018 14:21:55 GMT

@harveypny I believe that the alarm configuration can be found on the hardware tab of the SANtricity Storage Manager application. As I recall, it can be setup on a per-controller basis. You can click to view individual hardware components, and I believe that the alarms and their settings can be found there. Unfortunately, I do not have an older system that I can verify this with right now. Let me know if you are able to locate the alarm settings based on these instructions.

Thanks,

Michael

Re: Santricity E2600 Array

harveypny — Wed, 16 May 2018 11:00:15 GMT

I can list the hardware, but no where does it give me the ability to supress the beeping.

Re: Santricity E2600 Array

harveypny — Wed, 16 May 2018 11:10:15 GMT

What would be nice, if I could tell it stop checking for the battery every 1 min. Because if you supress the alarm on the front, the next min it starts beeping again. So someone would need to press the button every minute to stop the alarm. I wish I could tell the array to check once a day or something until we replace the battery.