E-series

Scott_G — Wed, 04 Jun 2025 10:58:29 GMT

Can you move disks from a E-series system to another E-series system without doing anything to the disk?

Re: E-series

NetApp_AU — Wed, 05 Aug 2020 07:50:13 GMT

Hello Scott_G

If the drive is not part of a Volume Group or Dynamic Disk Pool, you can usually remove the drive from the old array and insert it into the new array without any further action. If the drive is marked a incompatible though after moving it, initialize the drive.
https://docs.netapp.com/ess-11/topic/com.netapp.doc.ssm-sam-116/GUID-6C30A4D2-AD57-4D71-9715-4894355D59EC.html

If the drive is part of a Dynamic Disk Pool, remove the drive logically from the DDP first, then physically move the drive to the new array.
https://docs.netapp.com/ess-11/topic/com.netapp.doc.ssm-sam-116/GUID-AECC03BE-8E01-481D-9779-DDEBBBBF1FCE.html

If the drive belongs to a Volume Group, you must initialize it after moving it to the new array. Note that you cannot logically remove a drive from a Volume Group so the old array will see the original Volume Group as degraded after the drive is removed.
https://docs.netapp.com/ess-11/topic/com.netapp.doc.ssm-sam-116/GUID-6C30A4D2-AD57-4D71-9715-4894355D59EC.html

Scott_G — Thu, 01 Jul 2021 17:13:48 GMT

Thanks