Adding a new HBA to a FAS 8020

kodiak_f — Wed, 04 Jun 2025 10:43:15 GMT

Hello Folks,

I've found the procedure for replacing an HBA on a FAS here: https://library.netapp.com/ecm/ecm_download_file/ECMP1199905

I plan to use the above docs to add a new 12GB/s SAS HBA, but wasn't sure if there were any gotchas since I can't seem to find any docs for adding a new HBA to an existing FAS 8020 that didn't already have one.

Thanks!

Re: Adding a new HBA to a FAS 8020

darb0505 — Wed, 02 Dec 2020 02:22:44 GMT

Hi Kodiak,

The only thing that I would recommend is reviewing the NetApp Hardware Universe to verify the slot priority for the new HBA card. Based on the platform it would probably be slot 1 and if slot 1 is in use then slot 2.

After you install the card, you may want to boot into maintenance mode (boot menu, option 5) to verify you can see the card.

Let us know if you have any other questions or concerns.

Thanks

topic Adding a new HBA to a FAS 8020 in ONTAP Hardware

Adding a new HBA to a FAS 8020

Re: Adding a new HBA to a FAS 8020