https://community.netapp.com/t5/ONTAP-Hardware/FAS-8200-FCoE-Support/m-p/164146#M10654 <P>Dear All,</P><P>&nbsp;</P><P>please advise FAS 8200 is supports FCoE? If it support, please provide FCoE configuration guide with VMWare?</P> Wed, 04 Jun 2025 10:34:20 GMT ashrafbinali 2025-06-04T10:34:20Z https://community.netapp.com/t5/ONTAP-Hardware/FAS-8200-FCoE-Support/m-p/164146#M10654 <P>Dear All,</P><P>&nbsp;</P><P>please advise FAS 8200 is supports FCoE? If it support, please provide FCoE configuration guide with VMWare?</P> Wed, 04 Jun 2025 10:34:20 GMT https://community.netapp.com/t5/ONTAP-Hardware/FAS-8200-FCoE-Support/m-p/164146#M10654 ashrafbinali 2025-06-04T10:34:20Z https://community.netapp.com/t5/ONTAP-Hardware/FAS-8200-FCoE-Support/m-p/164272#M10668 <P>Yes it does support. Notes from NetApp documentation is as below</P><P>&nbsp;</P><P>"The onboard UTA2 ports can be configured as FC Target/Initiator or CNA (FCoE target/Ethernet). The UTA2 ports are based on a dual port ASIC and both ports on each ASIC must be set to the same mode (enforced by Data ONTAP). Install X6599A-R6 10GbE SFP+ modules or approved copper twinax cables when using in CNA (FCoE target/Ethernet) mode. Install X6596-R6 16Gb FC SFP+ module when using in FC Target/Initiator mode."</P><P>&nbsp;</P><P>&nbsp;</P> Tue, 23 Feb 2021 05:36:36 GMT https://community.netapp.com/t5/ONTAP-Hardware/FAS-8200-FCoE-Support/m-p/164272#M10668 mrahul 2021-02-23T05:36:36Z