[FAS2720] Shared volumes are displayed as hidden files

wwetsx — Wed, 04 Jun 2025 09:56:23 GMT

Hello

FAS2720A 9.10.1P7 version.

Create a shared volume with the NAS service and the IP band of the service line is 192.168.X.X.X. A temporary IP line (LIF) that can access the same shared volume was made to 1.1.1.3.

I gave the Backup Server 1.1.1.5 IP and accessed the shared volume to store a large number of files.

After that, if you connect to 192.168.X.X and check the volume, all the files are hidden. And when I connect to the shared volume with 1.1.1.5, I can't see any files. You can only see that the capacity is full.

When you turn off the hidden mark by accessing 192.168.X.X, you will not see any files in 1.1.1.

The security type that created VSERVER is unix and the security type of the volume is ntfs.

We need help with this situation.

Thank you.

Re: [FAS2720] Shared volumes are displayed as hidden files

Ontapforrum — Thu, 20 Oct 2022 16:05:04 GMT

Could you share the screenshots of what you have observed ?

Re: [FAS2720] Shared volumes are displayed as hidden files

wwetsx — Mon, 24 Oct 2022 01:14:11 GMT

Deleting and recreating the current volume to copy the backup file again.

If the same thing happens after copying, I'll tell you again

topic Re: [FAS2720] Shared volumes are displayed as hidden files in ONTAP Hardware

[FAS2720] Shared volumes are displayed as hidden files

Re: [FAS2720] Shared volumes are displayed as hidden files

Re: [FAS2720] Shared volumes are displayed as hidden files