https://community.netapp.com/t5/ONTAP-Hardware/FAS6200-Access/m-p/450226#M11713 <P>I bought this storage used. I want to use it in my laboratory. That's why I want to know how to reset it.</P> Wed, 10 Jan 2024 15:13:05 GMT Alex1977 2024-01-10T15:13:05Z https://community.netapp.com/t5/ONTAP-Hardware/FAS6200-Access/m-p/450207#M11711 <P>I have a used FAS6220 and I don't know the IP on the management port. How do I access it without ONTAP?</P> Wed, 04 Jun 2025 09:42:23 GMT https://community.netapp.com/t5/ONTAP-Hardware/FAS6200-Access/m-p/450207#M11711 Alex1977 2025-06-04T09:42:23Z https://community.netapp.com/t5/ONTAP-Hardware/FAS6200-Access/m-p/450216#M11712 <P>Could you please elaborate ? What is your objective here. If the IP is not available or no one knows in your IT department, then you will need to physically access the filer and re-configure it.</P> Wed, 10 Jan 2024 10:06:01 GMT https://community.netapp.com/t5/ONTAP-Hardware/FAS6200-Access/m-p/450216#M11712 Ontapforrum 2024-01-10T10:06:01Z https://community.netapp.com/t5/ONTAP-Hardware/FAS6200-Access/m-p/450226#M11713 <P>I bought this storage used. I want to use it in my laboratory. That's why I want to know how to reset it.</P> Wed, 10 Jan 2024 15:13:05 GMT https://community.netapp.com/t5/ONTAP-Hardware/FAS6200-Access/m-p/450226#M11713 Alex1977 2024-01-10T15:13:05Z https://community.netapp.com/t5/ONTAP-Hardware/FAS6200-Access/m-p/450235#M11714 <P>Get a console cable (there probably are USB adapters) and use a standard serial connection. <A href="https://kb.netapp.com/onprem/ontap/hardware/What_baud_rate_do_NetApp_controller_serial_console_connections_support" target="_blank">https://kb.netapp.com/onprem/ontap/hardware/What_baud_rate_do_NetApp_controller_serial_console_connections_support</A></P><P>&nbsp;</P><P>You'll need a 9600 Baud cable.</P> Wed, 10 Jan 2024 22:11:20 GMT https://community.netapp.com/t5/ONTAP-Hardware/FAS6200-Access/m-p/450235#M11714 paul_stejskal 2024-01-10T22:11:20Z